The objective of this paper is to design an efficient control scheme for car suspension system. The purpose of suspension system in vehicles is to get more comfortable riding and good handling with road vibrations. A nonlinear hydraulic actuator is connected to passive suspension system in parallel with damper. The Particles Swarm Optimization is used to tune a PID controller for active suspension system. The designed controller is applied for quarter car suspension system and result is compared with passive suspension system model and input road profile. Simulation results show good performance for the designed controller I. I NTRODUCTION Suspensions systems can be classified into three types are (passive, simi active and active). Figs. 1, 2 and 3 below shows the three types of Quarter car suspension system and hydraulic actuator position in each type.[1] Fig. 1 Passive Quarter Car Model Fig. 2 Simi-Active Quarter Car Model Fig. 3 Active Quarter Car Model In passive suspension systems the main parts are springs and hydraulic dumpers. The main job of these dumpers is to decrease the road profile and vibration effects into driver and passenger’s cabin. In active suspension system there are three parts under spring mass (body of car), spring, dumper and hydraulic actuator are connected in parallel. In this paper an additional parts is added to passive suspension system in parallel with springs and dumpers called a hydraulic actuator to get an active suspension system. This hydraulic actuator is a nonlinear part and it is controlled by spool valve. The mechanism of this actuator is to decrease the road profile and vibration from passive suspension system to get more comfortable riding. By using PID controller trained by Particle Swarm Optimization (PSO) to find optimal values of proportional, divertive and Quarter Car Active Suspension System Control Using PID Controller tuned by PSO Wissam H. Al-Mutar Turki Y. Abdalla Electrical Eng. Computer Eng. University of Basrah University of Basrah Basrah. Iraq. Basrah. Iraq. Spring Mass Unpring Mass K Kt C Ct Spring Mass Unpring K K C C Spring Mass Unpring Mass K Kt C F Ct اﻟﻤﺠﻠﺔ اﻟﻌﺮاﻗﻴﺔ ﻟﻠﻬﻨﺪﺳﺔ اﻟﻜﻬﺮﺑﺎﺋﻴﺔ واﻻﻟﻜﺘﺮوﻧﻴﺔ Iraq J. Electrical and Electronic Engineering ﻡﺠﻠﺪ 11 ، اﻟﻌﺪد 2 ، 2015 Vol.11 No.2 , 2015 Active suspension, PSO, PID controller, quarter car
In modern robotic field, many challenges have been appeared, especially in case of a multi-robot system that used to achieve tasks. The challenges are due to the complexity of the multi-robot system, which make the modeling of such system more difficult. The groups of animals in real world are an inspiration for modeling of a multi- individual system such as aggregation of Artemia. Therefore, in this paper, the multi-robot control system based on external stimuli such as light has been proposed, in which the feature of tracking Artemia to the light has been employed for this purpose. The mathematical model of the proposed design is derived and then Simulated by V-rep software. Several experiments are implemented in order to evaluate the proposed design, which is divided into two scenarios. The first scenario includes simulation of the system in situation of attraction of robot to fixed light spot, while the second scenario is the simulation of the system in the situation of the robots tracking of the movable light spot and formed different patterns like a straight-line, circular, and zigzag patterns. The results of experiments appeared that the mobile robot attraction to high-intensity light, in addition, the multi-robot system can be controlled by external stimuli. Finally, the performance of the proposed system has been analyzed.
Audio encryption has gained popularity in a variety of fields including education, banking over the phone, military, and private audio conferences. Data encryption algorithms are necessary for processing and sending sensitive information in the context of secure speech conversations. In recent years, the importance of security in any communications system has increased. To transfer data securely, a variety of methods have been used. Chaotic system-based encryption is one of the most significant encryption methods used in the field of security. Chaos-based communication is a promising application of chaos theory and nonlinear dynamics. In this research, a chaotic algorithm for the new chaotic chameleon system was proposed, studied, and implemented. The chameleon chaotic system has been preferred to be employed because it has the property of changing from self-excited (SA) to hidden-attractor (HA) which increases the complexity of the system dynamics and gives strength to the encryption algorithm. A chaotic chameleon system is one in which, depending on the parameter values, the chaotic attractor alternates between being a hidden attractor and a self-excited attractor. This is an important feature, so it is preferable to use it in cryptography compared to other types of chaotic systems. This model was first implemented using a Field Programmable Gate Array (FPGA), which is the first time it has been implemented in practical applications. The chameleon system model was implemented using MATLAB Simulink and the Xilinx System Generator model. Self-excited, hidden, and coexisting attractors are shown in the proposed system. Vivado software was used to validate the designs, and Xilinx ZedBoard Zynq-7000 FPGA was used to implement them. The dynamic behavior of the proposed chaotic system was also studied and analysis methods, including phase portrait, bifurcation diagrams, and Lyapunov exponents. Assessing the quality of the suggested method by doing analyses of many quality measures, including correlation, differential signal-to-noise ratio (SNR), entropy, histogram analysis, and spectral density plot. The numerical analyses and simulation results demonstrate how well the suggested method performs in terms of security against different types of cryptographic assaults.
The reluctance of industry to allow wireless paths to be incorporated in process control loops has limited the potential applications and benefits of wireless systems. The challenge is to maintain the performance of a control loop, which is degraded by slow data rates and delays in a wireless path. To overcome these challenges, this paper presents an application–level design for a wireless sensor/actuator network (WSAN) based on the “automated architecture”. The resulting WSAN system is used in the developing of a wireless distributed control system (WDCS). The implementation of our wireless system involves the building of a wireless sensor network (WSN) for data acquisition and controller area network (CAN) protocol fieldbus system for plant actuation. The sensor/actuator system is controlled by an intelligent digital control algorithm that involves a controller developed with velocity PID- like Fuzzy Neural Petri Net (FNPN) system. This control system satisfies two important real-time requirements: bumpless transfer and anti-windup, which are needed when manual/auto operating aspect is adopted in the system. The intelligent controller is learned by a learning algorithm based on back-propagation. The concept of petri net is used in the development of FNN to get a correlation between the error at the input of the controller and the number of rules of the fuzzy-neural controller leading to a reduction in the number of active rules. The resultant controller is called robust fuzzy neural petri net (RFNPN) controller which is created as a software model developed with MATLAB. The developed concepts were evaluated through simulations as well validated by real-time experiments that used a plant system with a water bath to satisfy a temperature control. The effect of disturbance is also studied to prove the system's robustness.
The main purpose of using the suspension system in vehicles is to prevent the road disturbance from being transmitted to the passengers. Therefore, a precise controller should be designed to improve the performances of suspension system. This paper presents a modeling and control of the nonlinear full vehicle active suspension system with passenger seat utilizing Fuzzy Model Reference Learning Control (FMRLC) technique. The components of the suspension system are: damper, spring and actuator, all of those components have nonlinear behavior, so that, nonlinear forces that are generated by those components should be taken into account when designed the control system. The designed controller consumes high power so that when the control system is used, the vehicle will consume high amount of fuel. It notes that, when vehicle is driven on a rough road; there will be a shock between the sprung mass and the unsprung mass. This mechanical power dissipates and converts into heat power by a damper. In this paper, the wasted power has reclaimed in a proper way by using electromagnetic actuator. The electromagnetic actuator converts the mechanical power into electrical power which can be used to drive the control system. Therefore, overall power consumption demand for the vehicle can be reduced. When the electromagnetic actuator is used three main advantages can be obtained: firstly, fuel consumption by the vehicle is decreased, secondly, the harmful emission is decreases, therefore, our environment is protected, and thirdly, the performance of the suspension system is improved as shown in the obtained results.
Many assistive devices have been developed for visually impaired (VI) person in recent years which solve the problems that face VI person in his/her daily moving. Most of researches try to solve the obstacle avoidance or navigation problem, and others focus on assisting VI person to recognize the objects in his/her surrounding environment. However, a few of them integrate both navigation and recognition capabilities in their system. According to above needs, an assistive device is presented in this paper that achieves both capabilities to aid the VI person to (1) navigate safely from his/her current location (pose) to a desired destination in unknown environment, and (2) recognize his/her surrounding objects. The proposed system consists of the low cost sensors Neato XV-11 LiDAR, ultrasonic sensor, Raspberry pi camera (CameraPi), which are hold on a white cane. Hector SLAM based on 2D LiDAR is used to construct a 2D-map of unfamiliar environment. While A* path planning algorithm generates an optimal path on the given 2D hector map. Moreover, the temporary obstacles in front of VI person are detected by an ultrasonic sensor. The recognition system based on Convolution Neural Networks (CNN) technique is implemented in this work to predict object class besides enhance the navigation system. The interaction between the VI person and an assistive system is done by audio module (speech recognition and speech synthesis). The proposed system performance has been evaluated on various real-time experiments conducted in indoor scenarios, showing the efficiency of the proposed system.
In this paper describes the operation of power system networks to be nearest to stability rated values limits. State estimation for monitoring and protection power system is very important because it provides a real-time (RT) Phase angle of different nodes of accuracy and then analysis and decided to choose control way (methods). In order to detect the exact situation (instant state) for power system networks parameters. In this paper proposes a new monitoring and analysis system state estimation method integrating with MATLAB environment ability, by using phasor measurement units (PMU's) technology, by this system the estimation problem, iterations numbers, and processing time will reduce. The measurements of phasors value of voltage signal and current estimated and analyzed. Mat lab/PSAT package use as a tool to design and simulate four electrical power systems networks such as INSG 24 buses, IEEE14 bus, Diyala city 10buses (IRAQ), and IEEE6 bus and then installed and applied PMU’s devices to each system. Simulation results show that the PMU's performances effectiveness appear clearly. All results show the validation of PMU’s devices as an estimator to power system networks states and a significant improvement in the accuracy of the calculation of network status. All results achieved and discussed through this paper setting up mathematical models with Graph Theoretic Procedure algorithm.
In this article, a robust control technique for 2-DOF helicopter system is presented. The 2-DOF helicopter system is 2 inputs and 2 outputs system that is suffering from the high nonlinearity and strong coupling. This paper focuses on design a simple, robust, and optimal controller for the helicopter system. Moreover, The proposed control method takes into account effects of the measurement noise in the closed loop system that effect on the performance of controller as well as the external disturbance. The proposed controller combines low pass filter with robust PID controller to ensure good tracking performance with high robustness. A low pass filter and PID controller are designed based H∞weighted mixed sensitivity. Nonlinear dynamic model of 2-DOF helicopter system linearized and then decoupled into pitch and yaw models. Finally, proposed controller applied for each model. Matlab program is used to check effectiveness the proposed control method. Simulation results show that the proposed controllers has best tracking performance with no overshot and the smallest settling time with respect to standard H∞and optimized PID controller.
This paper presents a simple method for the design of Chaotic Linear Feedback Shift Register (CLFSR) system. The proposed method is based on a combination of two known systems. The first is called Linear Feedback Shift Register (LFSR) system, and the other is called Chaotic Map system. The main principle of the proposed system is that, the output of the LFSR is modified by exclusive-or (XOR) it with the stream bit that is generated by using the chaotic map system to eliminate the linearity and the repeating in the output of the LFSR system. The proposed system is built under Matlab environment and the quality of sequence generation tested by using standard tests which shows that the proposed system is a good random number generator that overcome the linearity and repeating disadvantages.
Recently, chaos theory has been widely used in multimedia and digital communications due to its unique properties that can enhance security, data compression, and signal processing. It plays a significant role in securing digital images and protecting sensitive visual information from unauthorized access, tampering, and interception. In this regard, chaotic signals are used in image encryption to empower the security; that’s because chaotic systems are characterized by their sensitivity to initial conditions, and their unpredictable and seemingly random behavior. In particular, hyper-chaotic systems involve multiple chaotic systems interacting with each other. These systems can introduce more randomness and complexity, leading to stronger encryption techniques. In this paper, Hyper-chaotic Lorenz system is considered to design robust image encryption/ decryption system based on master-slave synchronization. Firstly, the rich dynamic characteristics of this system is studied using analytical and numerical nonlinear analysis tools. Next, the image secure system has been implemented through Field-Programmable Gate Arrays (FPGAs) Zedboard Zynq xc7z020-1clg484 to verify the image encryption/decryption directly on programmable hardware Kit. Numerical simulations, hardware implementation, and cryptanalysis tools are conducted to validate the effectiveness and robustness of the proposed system.
In this paper, a new nonlinear dynamic system, new three-dimensional fractional order complex chaotic system, is presented. This new system can display hidden chaotic attractors or self-excited chaotic attractors. The Dynamic behaviors of this system have been considered analytically and numerically. Different means including the equilibria, chaotic attractor phase portraits, the Lyapunov exponent, and the bifurcation diagrams are investigated to show the chaos behavior in this new system. Also, a synchronization technique between two identical new systems has been developed in master- slave configuration. The two identical systems are synchronized quickly. Furthermore, the master-slave synchronization is applied in secure communication scheme based on chaotic masking technique. In the application, it is noted that the message is encrypted and transmitted with high security in the transmitter side, in the other hand the original message has been discovered with high accuracy in the receiver side. The corresponding numerical simulation results proved the efficacy and practicability of the developed synchronization technique and its application
Real-time detection and recognition systems for vehicle license plates present a significant design and implementation challenge, arising from factors such as low image resolution, data noise, and various weather and lighting conditions.This study presents an efficient automated system for the identification and classification of vehicle license plates, utilizing deep learning techniques. The system is specifically designed for Iraqi vehicle license plates, adapting to various backgrounds, different font sizes, and non-standard formats. The proposed system has been designed to be integrated into an automated entrance gate security system. The system’s framework encompasses two primary phases: license plate detection (LPD) and character recognition (CR). The utilization of the advanced deep learning technique YOLOv4 has been implemented for both phases owing to its adeptness in real-time data processing and its remarkable precision in identifying diminutive entities like characters on license plates. In the LPD phase, the focal point is on the identification and isolation of license plates from images, whereas the CR phase is dedicated to the identification and extraction of characters from the identified license plates. A substantial dataset comprising Iraqi vehicle images captured under various lighting and weather circumstances has been amassed for the intention of both training and testing. The system attained a noteworthy accuracy level of 95.07%, coupled with an average processing time of 118.63 milliseconds for complete end-to-end operations on a specified dataset, thus highlighting its suitability for real-time applications. The results suggest that the proposed system has the capability to significantly enhance the efficiency and reliability of vehicle license plate recognition in various environmental conditions, thus making it suitable for implementation in security and traffic management contexts.
The energy management will play an important role in the future smart grid by managing loads in an intelligent way. Energy management programs, realized via House Energy Management systems (HEMS) for smart cities, provide many benefits; consumers enjoy electricity price savings, and utility operates at reduced peak demand. This paper proposed an adaptive energy management system for islanded mode and grid-connected mode. In this paper, a hybrid system that includes distribution electric grid, photovoltaics, and batteries are employed as energy sources in the residential of the consumer in order to meet the demand. The proposed system permits coordinated operation of distributed energy resources to concede necessary active power and additional service whenever required. This paper uses home energy management system which switches between the distributed energy and the grid power sources. The home energy management system incorporates controllers for maximum power point tracking, battery charge and discharge and inverter for effective control between different sources depending upon load requirement and availability of sources at maximum powerpoint. Also, in this paper, the Maximum Power Point Tracking (MPPT) technique is applied to the photovoltaic station to extract the maximum power from hybrid power system during variation of the environmental conditions. The operation strategy of energy storage systems is proposed to solve the power changes from photovoltaics and houses loads fluctuations locally, instead of reflecting those disturbances to the utility grid. Furthermore, the energy storage systems energy management scheme will help to achieve the peak reduction of the houses daily electrical load demand. The simulation results have verified the effectiveness and feasibility of the introduced strategy and the capability of the proposed controller for a hybrid microgrid operating in different modes.
Soft computing control system have been applied in various applications particularly in the fields of robotics controls. The advantage of having a soft computing controls methods is that it enable more flexibility to the control system compared with conventional model based controls system. In this paper, a UAV airship is controlled using fuzzy logic for its propulsion and steering system. The airship is tested on a simulation level before test flight. The prototype airship has on board GPS and compass for telemetry and transmitted to the ground control system via a wireless link.
To gain insight into complex biological endocrine glucose-insulin regulatory system where the interactions of components of the metabolic system and time-delay inherent in the biological system give rise to complex dynamics. The modeling has increased interest and importance in physiological research and enhanced the medical treatment protocols. This brief contains a new model using time delay differential equations, which give an accurate result by utilizing two explicit time delays. The bifurcation analysis has been conducted to find the main system parameters bifurcation values and corresponding system behaviors. The results found consistent with the biological experiments results.
In this paper, three phase induction motor (IM) has been modelled in stationary reference frame and controlled by using direct torque control (DTC) method with constant V/F ratio. The obtained drive system consists of nine nonlinear first order differential equations. The numerical analysis is used to investigate the system behavior due to control parameter change. The integral gain of speed loop is used as bifurcation parameter to test the system dynamics. The simulation results show that the system has period-doubling route to chaos, period-1, period-2, period-4, and then the system gets chaotic oscillation. A specific value of the parameter range shows that the system has very strong randomness and a high degree of disturbance
In this paper, we consider robust control of nonlinear systems, via inclusion nonlinear systems solution and $H_{\infty}$ controller using singular perturbation method. First, using a technique for solving inclusion nonlinear systems, we transform the nonlinear system to an ordinary nonlinear system. Then using normal form equations, we eliminate the nonlinear part of the system matrix of equations of the system and transform it to a linear diagonal form. Separating new equations into slow and fast subsystems, due to the singular perturbation method and with the assumption of norm-boundedness of the fast dynamics, we can treat them as disturbance and design an $H_{\infty}$ controller for a system with a lower order than the original one that stabilizes the overall closed loop system. The proposed method is applied to a nominal system.
In this work, the phase lock loop PLL-based controller has been adopted for tracking the resonant frequency to achieve maximum power transfer between the power source and the resonant load. The soft switching approach has been obtained to reduce switching losses and improve the overall efficiency of the induction heating system. The jury’s stability test has been used to evaluate the system’s stability. In this article, a multilevel inverter has been used with a series resonant load for an induction heating system to clarify the effectiveness of using it over the conventional full-bridge inverter used for induction heating purposes. Reduced switches five-level inverter has been implemented to minimize switching losses, the number of drive circuits, and the control circuit’s complexity. A comparison has been made between the conventional induction heating system with full bridge inverter and the induction heating system with five level inverter in terms of overall efficiency and total harmonic distortion THD. MATLAB/ SIMULINK has been used for modeling and analysis. The mathematical analysis associated with simulation results shows that the proposed topology and control system performs well.
This paper presented an investigation into the performance of system identification using an Adaptive Neuro-Fuzzy Inference System (ANFIS) technique for the dynamic modelling of a two- dimensional flexible plate structure. It is confirmed experimentally, using National Instrumentation (NI) Data Acquisition System (DAQ) and flexible plate test rig that ANFIS can be effectively used for modelling the system with highly accurate results. The accuracy of the modelling results is demonstrated through validation tests including training and test validation and correlation tests.
In this paper, we evaluate the performance of WiMAX downlink system in vicinity of UWB system. The study is achieved via simulating a scenario of an office building which utilizes from both WiMAX and UWB appliances. From the simulation results, we found that WiMAX system is largely affected by the UWB interference. However, in order to overcome the interference problem and achieve reasonable BER (Bit Error Rate) of 10 -4 , we found that it is very necessary to raise the WiMAX transmitted power in relative to that of UWB interferer. So, the minimum requirements for WiMAX system to overcome UWB interference are stated here in this work.
Health Information Technology (HIT) provides many opportunities for transforming and improving health care systems. HIT enhances the quality of health care delivery, reduces medical errors, increases patient safety, facilitates care coordination, monitors the updated data over time, improves clinical outcomes, and strengthens the interaction between patients and health care providers. Living in modern large cities has a significant negative impact on people's health, for instance, the increased risk of chronic diseases such as diabetes. According to the rising morbidity in the last decade, the number of patients with diabetes worldwide will exceed 642 million in 2040, meaning that one in every ten adults will be affected. All the previous research on diabetes mellitus indicates that early diagnoses can reduce death rates and overcome many problems. In this regard, machine learning (ML) techniques show promising results in using medical data to predict diabetes at an early stage to save people's lives. In this paper, we propose an intelligent health care system based on ML methods as a real-time monitoring system to detect diabetes mellitus and examine other health issues such as food and drug allergies of patients. The proposed system uses five machine learning methods: K-Nearest Neighbors, Naïve Bayes, Logistic Regression, Random Forest, and Support Vector Machine (SVM). The system selects the best classification method with high accuracy to optimize the diagnosis of patients with diabetes. The experimental results show that in the proposed system, the SVM classifier has the highest accuracy of 83%.
The Leader detecting and following are one of the main challenges in designing a leader-follower multi-robot system, in addition to the challenge of achieving the formation between the robots, while tracking the leader. The biological system is one of the main sources of inspiration for understanding and designing such multi-robot systems, especially, the aggregations that follow an external stimulus such as light. In this paper, a multi-robot system in which the robots are following a spotlight is designed based on the behavior of the Artemia aggregations. Three models are designed: kinematic and two dynamic models. The kinematic model reveals the light attraction behavior of the Artemia aggregations. The dynamic model will be derived based on the newton equation of forces and its parameters are evaluated by two methods: first, a direct method based on the physical structure of the robot and, second, the Least Square Parameter Estimation method. Several experiments are implemented in order to check the success of the three proposed systems and compare their performance. The experiments are divided into three scenarios of simulation according to three paths: the straight line, circle, zigzag path. The V-Rep software has been used for the simulation and the results appeared the success of the proposed system and the high performance of tracking the spotlight and achieving the flock formation, especially the dynamic models.
Microgrids (ℳ-grids) can be thought of as a small-scale electrical network comprised of a mix of Distributed Generation (DG) resources, storage devices, and a variety of load species. It provides communities with a stable, secure, and renewable energy supply in either off-grid (grid-forming) or on-grid (grid-following) mode. In this work, a control strategy of coordinated power management for a Low Voltage (LV) ℳ-grid with integration of solar Photovoltaic (PV), Battery Energy Storage System (BESS) and three phase loads operated autonomously or connected to the utility grid has been created and analyzed in the Matlab Simulink environment. The main goal expressed here is to achieve the following points: (i) grid following, grid forming modes, and resynchronization mode between them, (ii) Maximum Power Point Tracking (MPPT) from solar PV using fuzzy logic technique, and active power regulator based boost converter using a Proportional Integral (PI) controller is activated when a curtailment operation is required, (iii) ℳ-grid imbalance compensation (negative sequence) due to large single-phase load is activated, and (iv) detection and diagnosis the fault types using Discrete Wavelet Transform (DWT). Under the influence of irradiance fluctuation on solar plant, the proposed control technique demonstrates how the adopted system works in grid- following mode (PQ control), grid- formation, and grid resynchronization to seamlessly connect the ℳ-grid with the main distribution system. In this system, a power curtailment management system is introduced in the event of a significant reduction in load, allowing the control strategy to be switched from MPPT to PQ control, permitting the BESS to absorb excess power. Also, in grid-following mode, the BESS's imbalance compensation mechanism helps to reduce the negative sequence voltage that occurs at the Point of Common Coupling (PCC) bus as a result of an imbalance in the grid's power supply. In addition to the features described above, this system made use of DWT to detect and diagnose various fault conditions.
Load Frequency Control (LFC) is a basic control strategy for proper operation of the power system. It ensures the ability of each generator in regulating its output power in such way to maintain system frequency and tie-line power of the interconnected system at prescribed levels. This article introduces comprehensive comparative study between Chaos Optimization Algorithm (COA) and optimal control approaches, such as Linear Quadratic Regulator (LQR), and Optimal Pole Shifting (OPS) regarding the tuning of LFC controller. The comparison is extended to the control approaches that result in zero steady-state frequency error such as Proportional Integral (PI) and Proportional Integral Derivative (PID) controllers. Ziegler-Nicholas method is widely adopted for tuning such controllers. The article then compares between PI and PID controllers tuned via Ziegler-Nicholas and COA. The optimal control approaches as LQR and OPS have the characteristic of steady-state error. Moreover, they require the access for full state variables. This limits their applicability. Whereas, Ziegler-Nicholas PI and PID controllers have relatively long settling time and high overshoot. The controllers tuned via COA remedy the defects of optimal and zero steady-state controllers. The performance adequacy of the proposed controllers is assessed for different operating scenarios. Matlab and its dynamic platform, Simulink, are used for stimulating the system under concern and the investigated control techniques. The simulation results revealed that COA results in the smallest settling time and overshoot compared with traditional controllers and zero steady-state error controllers. In the overshoot, COA produces around 80% less than LQR and 98.5% less than OPS, while in the settling time, COA produces around 81% less than LQR and 95% less than OPS. Moreover, COA produces the lowest steady-state frequency error. For Ziegler-Nicholas controllers, COA produces around 53% less in the overshoot and 42% less in the settling time.
The demand for a secured web storage system is increasing daily for its reliability which ensures data privacy and confidentiality. The proposed paper aims to find the most secure ways to maintain integrity and protect privacy and security in healthcare management systems. The Advanced Encryption Standard (AES) algorithm is used to encrypt data transferred by providing a means to check the integrity of information transmitted and make it more immune to cyberattack techniques, this was implemented by using Keyed-Hash Message Authentication Code (HMAC) and Secured Hash Algorithm-256 (SHA-256). The risk of exposure to attackers can be avoided by using honeypot systems combined with Intrusion detection systems (IDSs) as a firewall system is not effective against such attacks alone. The experimental results evaluate the proposed security health information management system by comparing the performance of the encryption algorithm based on encryption time, memory and CPU usage, and entropy for different plaintext lengths. In addition, it can be seen that when changing the AES key size, more memory and time are required the longer the key size is used. The 128 bits AES key is therefore advised if the system must operate in hard real-time.
In this paper, we evaluate the performance of UMTS (Universal Mobile Telecommunication System) downlink system in vicinity of UWB system. The study is achieved via simulating a scenario of a building which is located within UMTS cell borders and utilizes from both UMTS and UWB appliances. The simulation results show that the UMTS system is considerably affected by the UWB interference. However, in order to battle this interference and achieve reasonable BER (Bit Error Rate) of 10 -4 , we found that it is very necessary to carefully raise the UMTS base station transmitted power against that of UWB interferer. So, the minimum requirements for UMTS system to overcome UWB interference are stated in this work.
Voltage instability problems in power system is an important issue that should be taken into consideration during the planning and operation stages of modern power system networks. The system operators always need to know when and where the voltage stability problem can occur in order to apply suitable action to avoid unexpected results. In this paper, a study has been conducted to identify the weakest bus in the power system based on multi-variable control, modal analysis, and Singular Value Decomposition (SVD) techniques for both static and dynamic voltage stability analysis. A typical IEEE 3- machine, 9-bus test power system is used to validate these techniques, for which the test results are presented and discussed.
This work presents a Fuzzy based adaptive Sliding Mode Control scheme to deal with control problem of full vehicle active suspension system and take into consideration the nonlinearities of the spring and damper, unmodeled dynamics as well as the external disturbances. The control law of fuzzy based adaptive Sliding Mode Control scheme will update the parameters of fuzzy sliding mode control by using the stability analysis of Lyapunov criteria such that the convergence in finite time and the stability of the closed loop are ensured. The proposed control scheme consists of four similar subsystems used for the four sides of the vehicle. The sub control scheme contains two loops, the outer loop is built using sliding mode controller with fuzzy estimator to approximate and estimate the unknown parameters in the system. In the inner loop, a controller of type Fractional Order PID (FOPID) is utilized to create the required actuator force. All parameters in the four sub control schemes are optimized utilizing Artificial Bee Colony (ABC) algorithm in order to improve the performance. The results indicate the effectiveness and good achievement of the proposed controller in providing the best ability to limit the vibration with good robustness properties in comparison with passive suspension system and using sliding mode control method. The controlled suspension system shows excellent results when it was tested with and without typical breaking and bending torques.
Recently, the incorporation of state-of-the-art technology such as Electronic Healthcare Records (EHRs), networks, and cloud computing has transformed the traditional healthcare system. However, security problems have arisen as a result of the integration of technology. Secure remote user authentication is a core part of the healthcare system to validate the user's identification via an unsecure communication network. Since then, several remote user authentication schemes have been presented, each with its own set of pros and limitations. As a result, security, malicious attacks and privacy concerns are considered one of the main challenges related to the healthcare system. In this paper, we propose a safe user authentication scheme for patients in the healthcare system that overcomes these flaws and confirms the security of the proposed work using scyther, a formal security tool. In the healthcare environment, our work provides an effective means to construct an environment capable of setting, registering, storing, searching, analyzing, authentication, and verifying electronic healthcare information in order to protect the information of patients. Furthermore, our suggested scheme uses symmetric encryption based on the crypto- hash function for accessing the anomaly of the patient's identity and One-Time Password (OTP). Towards the end of the study, the performance analysis results indicate a delicate balance of security and performance that is frequently lacking in previous works.
In this paper, the vector-controlled Permanent Magnet Synchronous Motor (PMSM) fed by Indirect Matrix Converter (IMC) is analyzed, designed, and simulated by using the IMC with Carrier Based Pulse Width Modulation (CBPWM). The CBPWM strategy is based on Space Vector Pulse Width Modulation (SVPWM) analysis, it is used to enhance the input current waveform, reduce the complexity of switching signals generation, and to solve the commutation problem. The traditional PMSM drive system is simulated for comparison with proposed drive system. The proposed drive system is compared to the traditional drive system using the Total Harmonic Distortion (THD). The comparison results show that the proposed drive system outperform the traditional drive system by THD different of 1/30 of input current and 1/1.5 of stator current, with high input power factor.
The main objective of designed the controller for a vehicle suspension system is to reduce the discomfort sensed by passengers which arises from road roughness and to increase the ride handling associated with the pitching and rolling movements. This necessitates a very fast and accurate controller to meet as much control objectives, as possible. Therefore, this paper deals with an artificial intelligence Neuro-Fuzzy (NF) technique to design a robust controller to meet the control objectives. The advantage of this controller is that it can handle the nonlinearities faster than other conventional controllers. The approach of the proposed controller is to minimize the vibrations on each corner of vehicle by supplying control forces to suspension system when travelling on rough road. The other purpose for using the NF controller for vehicle model is to reduce the body inclinations that are made during intensive manoeuvres including braking and cornering. A full vehicle nonlinear active suspension system is introduced and tested. The robustness of the proposed controller is being assessed by comparing with an optimal Fractional Order PI λ D μ (FOPID) controller. The results show that the intelligent NF controller has improved the dynamic response measured by decreasing the cost function.
The decline in the marketing volume of Rabobank Group ICT is a serious incident as it can hinder the implementation of an increasing number of software releases for business development. The Service Desk Agent records the activities that occur to find out the problems experienced in the form of an event log. Process mining can be used to generate process model visualizations based on event logs to explicitly monitor the business. Fuzzy Miner and Heuristic Miner algorithms can be used to handle complex event logs. In this study, an analysis of the Rabobank Group ICT incident was carried out with process mining using the Fuzzy Miner and Heuristic Miner algorithms. Process mining is done by discovery, conformance, and enhancement. Based on the results of the study, it is known that the division of the work area is not good enough to cause a team to work on a lot of events while there are other teams that only work on one event. Therefore, it is necessary to have a clear and balanced division of domains and workloads so that incidents do not recur.
Nowadays, there are no accurate records of the various quantities of fuel being dispensed at the Iraqi fuel stations. All such reports are usually paper-based and are missing the required precision to control this valuable commodity, which could lead to misuse or illegal sale of fuel. This paper presents a control system based on RFID technology to monitor the supply and dispensing of vehicle fuel in Baghdad. The system consists of RFID readers attached to fuel dispensers and pumps, and RFID tags assigned to the vehicles and the trucks used for delivering fuel to the fuel stations. A hardware part is connected to conventional fuel dispensers and machines, located at both the stations and the fuel refineries or depots, which makes them work under the control of the RFID system, without the need to rebuild new dispensers. The designed system database is a centralized one located on a cloud server, in order to allow fuel stations to communicate with it and do the required transactions. Throughout this system, different reports can be generated, which can give important online statistics about the movement of fuel supplies over the city.
The increasing demand for electricity due to population expansion has led to frequent interruptions in electrical power, so there are backup power lines everywhere, especially in the sectors of education, health, banking, transportation and communications. DC sources are beginning to become widely spread in terms of low maintenance requirements, no need for refueling, and no pollutant emission in these institutions. The problems of DC systems are; losses in DC system components, and change in output voltage as loads change. This research presents a power system that generates 1760W AC power from batteries bank, the system consists of a twin inverter to reduce losses in switches and filters, and thus improving the efficiency and the power factor of the system, and fuzzy logic controllers to regulate the output voltage of the converter and inverter. Modeling and simulation in MATLAB / Simulink showed obtaining a constant load voltage with acceptable values of total harmonics distortion (THD) under different conditions of loads and batteries.
This is a design of an expert system in the focused ion beam optical system by using fuzzy logic technique to build an intelligent agent. Present software has been designed as an interpretation expert system, written in Visual C# for optimizing the calculation of three electrostatic lenses column. By using such rule based engine, the axial potential distributions for electrostatic fields undergo the constraints have been used to find spot size focusing for ions in the image plane which have values are very useful for getting and designing FIB model, over ranges of ion beam angles (5, 10,30,50,75 and 100) mrad.
In the city of Basrah, there is an urgent need to use the water for irrigation process more efficiently for many reasons: one of them, the high temperature in long summer season and the other is the lack of sources fresh water sources. In this work, a smart irrigation system based wireless sensor networks (WSNs) is implemented. This system consists of the main unit that represented by an Arduino Uno board which include an ATmega328 microcontroller, different sensors as moisture sensors, temperature sensors, humidity sensors, XBee modules and solenoid valve. Zigbee technology is used in this project for implementing wireless technology. This system has two modes one manual mode, the other is a smart mode. The set points must be changed manually according to the specified season to satisfy the given conditions for the property irrigation, and the smart operation of the system will be according to these set points.
Since recent societies become more hooked into electricity, a higher level of power supply continuity is required from power systems. The expansion of those systems makes them liable to electrical faults and several failures are raised due to totally different causes, like the lightning strike, power system element failure caused by mechanical aging as well as human mistakes. These conditions impact the stability of the power as well as lead to costly maintenance and loss of output. This article examines the latest technologies and strategies to determine the location of faults in medium voltage distribution systems. The aim is to classify and assess different strategies in order to determine the best recommended models in practice or for further improvement. Several ways to locate failures in distribution networks have therefore been established. Because faults are unpredictable, quick fault location as well as isolating are necessary to reduce the impact of faults in distribution networks as well as removing the emergency condition from the entire system. This study also includes a comprehensive evaluation of several defect location methods depending on the algorithm employed, the input, the test system, the characteristics retrieved, and the degree of complexity. In order to gain further insight into the strengths and limitations of each method and also comparative analysis is carried out. Then the main problems of the fault location methods in distribution network are briefly expounded.
In this paper the identification and control for the impressed current cathodic protection (ICCP) system are present. Firstly, an identification model using an Adaptive Neuro-Fuzzy Inference Systems (ANFIS) was implemented. The identification model consists of four inputs which are the aeration flow rates, the temperature, conductivity, and protection current, and one output that represented by the structure-to-electrolyte potential. The used data taken from an experimental CP system model, type impressed current submerged sample pipe carbon steel. Secondly, two control techniques are used. The first control technique use a conventional Proportional-Integral-Derivative (PID) controller, while the second is the fuzzy controller. The PID controller can be applied to control ICCP system and quite easy to implement. But, it required very fine tuning of its parameters based on the desired value. Furthermore, it needed time response more than fuzzy controller to track reference voltage. So the fuzzy controller has a faster and better response.
This paper presents a new optimization algorithm called corrosion diffusion optimization algorithm (CDOA). The proposed algorithm is based on the diffusion behavior of the pitting corrosion on the metal surface. CDOA utilizes the oxidation and reduction electrochemical reductions as well as the mathematical model of Gibbs free energy in its searching for the optimal solution of a certain problem. Unlike other algorithms, CDOA has the advantage of dispensing any parameter that need to be set for improving the convergence toward the optimal solution. The superiority of the proposed algorithm over the others is highlighted by applying them on some unimodal and multimodal benchmark functions. The results show that CDOA has better performance than the other algorithms in solving the unimodal equations regardless the dimension of the variable. On the other hand, CDOA provides the best multimodal optimization solution for dimensions less than or equal to (5, 10, 15, up to 20) but it fails in solving this type of equations for variable dimensions larger than 20. Moreover, the algorithm is also applied on two engineering application problems, namely the PID controller and the cantilever beam to accentuate its high performance in solving the engineering problems. The proposed algorithm results in minimized values for the settling time, rise time, and overshoot for the PID controller. Where the rise time, settling time, and maximum overshoot are reduced in the second order system to 0.0099, 0.0175 and 0.005 sec., in the fourth order system to 0.0129, 0.0129 and 0 sec, in the fifth order system to 0.2339, 0.7756 and 0, in the fourth system which contains time delays to 1.5683, 2.7102 and 1.80 E-4 sec., and in the simple mass-damper system to 0.403, 0.628 and 0 sec., respectively. In addition, it provides the best fitness function for the cantilever beam problem compared with some other well-known algorithms.
Today, the trends are the robotics field since it is used in too many environments that are very important in human life. Covid 19 disease is now the deadliest disease in the world, and most studies are being conducted to find solutions and avoid contracting it. The proposed system senses the presence according to a specific injury to warn of it and transfer it to the specialist doctor. This system is designed to work in service departments such as universities, institutes, and all state departments serving citizens. This system consists of two parts: the first is fixed and placed on the desk and the other is mobile within a special robot that moves to perform the required task. This system was tested at the University of Basrah within the college of engineering, department of electrical Engineering, on teaching staff, students, and staff during the period of final academic exams. The presence of such a device is considered a warning according to a specific condition and isn’t a treatment for it, as the treatment is prescribed by the specialist doctor. It is found that the average number of infected cases is about 3% of the total number of students and the teaching staff and the working staff. The results were documented in special tables that go to the dean of the college with the attendance tables to know the daily health status of the students.
In recent years, the number of researches in the field of artificial limbs has increased significantly in order to improve the performance of the use of these limbs by amputees. During this period, High-Density surface Electromyography (HD-sEMG) signals have been employed for hand gesture identification, in which the performance of the classification process can be improved by using robust spatial features extracted from HD-sEMG signals. In this paper, several algorithms of spatial feature extraction have been proposed to increase the accuracy of the SVM classifier, while the histogram oriented gradient (HOG) has been used to achieve this mission. So, several feature sets have been extracted from HD-sEMG signals such as; features extracted based on HOG denoted by (H); features have been generated by combine intensity feature with H features denoted as (HI); features have been generated by combine average intensity with H features denoted as (AIH). The proposed system has been simulated by MATLAB to calculate the accuracy of the classification process, in addition, the proposed system is practically validated in order to show the ability to use this system by amputees. The results show the high accuracy of the classifier in real-time which leads to an increase in the possibility of using this system as an artificial hand.
This work concerns creating a monitoring system for a smart hospital using Raspberry Pi to measure vital signs. The readings are continually sent to central monitoring units outside the room instead of being beside the patients, to ensure less contacting between the medical staff and patients, also the cloud is used for those who leave the hospital, as the design can track on their medical cases. Data presentation and analysis were accomplished by the LabVIEW program. A Graphical User Interface (GUI) has been created by the Virtual-Instrument (VI) of this program that offer real-time access to monitor patients’ measurements. If unhealthy states are detected, the design triggers alerts and sends SMS message to the doctor. Furthermore, the clinicians can scan a QR code (which is assigned to each patient individually) to access its real-time measurements. The system also utilizes Electrocardiography (ECG) to detect abnormalities and identify specific heart diseases based on its extracted parameters to encourage patients to seek timely medical attention, while aiding doctors in making well-informed decisions. To evaluate the system’s performance, it is tested in the hospital on many patients of different ages and diseases as well. According to the results, the accuracy measurement of SpO2 was about 98.39%, 97.7% for (heart rate) and 98.7% for body temperature. This shows that the system can offer many patients receiving health services from various facilities, and it ensures efficient data management, access control, real-time monitoring, and secure patient information aligning with healthcare standards.
This work focuses on the use of the Linear Quadratic Gaussian (LQG) technique to construct a reliable Static VAr Compensator (SVC), Thyristor Controlled Series Compensator (TCSC), and Excitation System controller for damping Subsynchronous Resonance ( SSR ) in a power system. There is only one quantifiable feedback signal used by the controller (generator speed deviation). It is also possible to purchase this controller in a reduced-order form. The findings of the robust control are contrasted with those of the "idealistic" full state optimal control. The LQG damping controller's regulator robustness is then strengthened by the application of Loop Transfer Recovery (LTR). Nonlinear power system simulation is used to confirm the resilience of the planned controller and demonstrates how well the regulator dampens power system oscillations. The approach dampens all torsional oscillatory modes quickly while maintaining appropriate control actions, according to simulation results.
Network reconfiguration in distribution system is realized by changing the status of sectionalizing switches, and is usually done for the purpose of loss reduction. Loss reduction can result in substantial benefits for a utility. Other benefits from loss reduction include increased system capacity, and possible deferment or elimination of capital expenditures for system improvements and expansion. There is also improved voltage regulation as a result of reducing feeder voltage drop. Research work included by this paper focuses on using branch exchange method to minimize losses and solve the problems over different radial configuration. Solution’s algorithm for loss minimization has been developed based on two stages of solution methodology. The first stage determines maximum loss-reduction loop by comparing the size of circles for every loop. In a distribution system, a loop is associated by a tie-line and hence there are several loops in the system. To obtain the maximum loss- reduction loop, size of modified zero loss-change circles are compared, and the loop within the largest circle is identified for maximum loss-reduction. The second stage determines the switching operation to be executed in that loop to reach a minimum loss network configuration by comparing the size of the loop circle for each branch-exchange. The smallest circle is to be identified for the best solution; the size of the loop circle is reduced when the losses are minimized. The performance of the proposed branch exchange method is tested on 16-bus distribution systems.
Recently, Jones matrix parameter shift keying (JMPSK) technique has been proposed in the literature to achieve phase noise and polarization state insensitive optical communication systems. The aim of this paper is to examine the performance of this system in the presence of system impairments, namely channel dichroism. A comprehensive analysis is presented to assess the effect of dichroism on the bit-error-rate (BER) characteristics of JMPSK receiver.
The reliability and feasibility of optical coherent communication system are strongly conditioned by laser phase noise and fluctuations of the state of polarization (SOP) of the optical field at the output of conventional single mode fiber. The double frequency parameter shift keying (DFPSK) system has been proposed in the literature as an efficient scheme that allows compensation of both effects by sending a reference channel that is suitably frequency shifted by using polarization modulation. This paper presents a comprehensive theoretical analysis for the performance of this system in the presence of dichroism which is introduced when the transmission channel has polarization dependent losses or amplifications. The results indicate that the performance of DFPSK system is affected by dichroism even in the low noise frequency regime.
Nowadays, multimedia communication has become very widespread and this requires it to be protected from attackers and transmitted securely for reliability. Encryption and decryption techniques are useful in providing effective security for speech signals to ensure that these signals are transmitted with secure data and prevent third parties or the public from reading private messages. Due to the rapid improvement in digital communications over the recent period up to the present, the security of voice data transmitted over various networks has been classified as a favored field of study in earlier years. The contributions to audio encryption are discussed in this review. This Comprehensive review mainly focuses on presenting several kinds of methods for audio encryption and decryption the analysis of these methods with their advantages and disadvantages have been investigated thoroughly. It will be classified into encryption based on traditional methods and encryption based on advanced chaotic systems. They are divided into two types, continuous-time system, and discrete-time system, and also classified based on the synchronization method and the implementation method. In the fields of information and communications security, system designers face many challenges in both cost, performance, and architecture design, Field Programmable gate arrays (FPGAs) provide an excellent balance between computational power and processing flexibility. In addition, encryption methods will be classified based on Chaos-based Pseudo Random Bit Generator, Fractional-order systems, and hybrid chaotic generator systems, which is an advantageous point for this review compared with previous ones. Audio algorithms are presented, discussed, and compared, highlighting important advantages and disadvantages. Audio signals have a large volume and a strong correlation between data samples. Therefore, if traditional cryptography systems are used to encrypt such huge data, they gain significant overhead. Standard symmetric encryption systems also have a small key-space, which makes them vulnerable to attacks. On the other hand, encryption by asymmetric algorithms is not ideal due to low processing speed and complexity. Therefore, great importance has been given to using chaotic theory to encode audio files. Therefore, when proposing an appropriate encryption method to ensure a high degree of security, the key space, which is the critical part of every encryption system, and the key sensitivity must be taken into account. The key sensitivity is related to the initial values and control variables of the chaotic system chosen as the audio encryption algorithm. In addition, the proposed algorithm should eliminate the problems of periodic windows, such as limited chaotic range and non-uniform distribution, and the quality of the recovered audio signal remains good, which confirms the convenience, reliability, and high security.
In this paper, a control strategy for a combination PV-BESS-SC hybrid system in islanded microgrid with a DC load is designed and analyzed using a new topology. Although Battery Energy Storage System (BESS) is employed to keep the DC bus voltage stable; however, it has a high energy density and a low power density. On the other hand, the Supercapacitor (SC) has a low energy density but a high-power density. As a result, combining a BESS and an SC is more efficient for power density and high energy. Integrating the many sources is more complicated. In order to integrate the SC and BESS and deliver continuous power to the load, a control strategy is required. A novel method for controlling the bus voltage and energy management will be proposed in this paper. The main advantage of the proposed system is that throughout the operation, the State of Charging (SOC), BESS current, and SC voltage and current are all kept within predetermined ranges. Additionally, SC balances fast- changing power surges, while BESS balances slow-changing power surges. Therefore, it enhances the life span and minimizes the current strains on BESS. To track the Maximum Power Point (MPP) or restrict power from the PV panel to the load, a unidirectional boost converter is utilized. Two buck converters coupled in parallel with a boost converter are proposed to charge the hybrid BESS-SC. Another two boost converters are used to manage the discharge operation of the BESS-SC storage in order to reduce losses. The simulation results show that the proposed control technique for rapid changes in load demand and PV generation is effective. In addition, the proposed technique control strategy is compared with a traditional control strategy.
Agriculture is the primary food source for humans and livestock in the world and the primary source for the economy of many countries. The majority of the country's population and the world depend on agriculture. Still, at present, farmers are facing difficulty in dealing with the requirements of agriculture. Due to many reasons, including different and extreme weather conditions, the abundance of water quality, etc. This paper applied the Internet of Things and deep learning system to establish a smart farming system to monitor the environmental conditions that affect tomato plants using a mobile phone. Through deep learning networks, trained the dataset taken from PlantVillage and collected from google images to classify tomato diseases, and obtained a test accuracy of 97%, which led to the publication of the model to the mobile application for classification for its high accuracy. Using the IoT, a monitoring system and automatic irrigation were built that were controlled through the mobile remote to monitor the environmental conditions surrounding the plant, such as air temperature and humidity, soil moisture, water quality, and carbon dioxide gas percentage. The designed system has proven its efficiency when tested in terms of disease classification, remote irrigation, and monitoring of the environmental conditions surrounding the plant. And giving alerts when the values of the sensors exceed the minimum or higher values causing damage to the plant. The farmer can take the appropriate action at the right time to prevent any damage to the plant and thus obtain a high-quality product.
This paper addressed the design of online uninterruptible power supply (UPS) system with a low frequency transformer for isolation, based on given specifications which include bypass switch and battery and taken into account the concentrated on open loop operation. Depending on the application, the online UPS system is composed by two stage conversions of AC/DC and DC/AC, the enclosure of these freeloading effects of all components and devices is very important to design the UPS system for acceptable performance. The initial stage of the design is based on the theoretical calculations and few assumptions have been made throughout the design. Simulation work has been carried out by MATLAB/Simulink program to validate the operation of the online UPS system with low frequency transformer isolation. The analysis of the results are presented and the justifications with regards to performance evaluation parameters which some are not satisfied the design specifications are discussed in details.
A self learning fuzzy logic controller for ship steering systems is proposed in this paper. Due to the high nonlinearity of ship steering system, the performances of traditional control algorithms are not satisfactory in fact. An intelligent control system is designed for controlling the direction heading of ships to improve the high e ffi ciency of transportation, the convenience of manoeuvring ships, and the safety of navigation. The design of fuzzy controllers is usually performed in an ad hoc manner where it is hard to justify the choice of some fuzzy control parameters such as the parameters of membership function. In this paper, self tuning algorithm is used to adjust the parameters of fuzzy controller. Simulation results show that the efficiency of proposed algorithm to design a fuzzy controller for ship steering system.
A torsional rotating system is considered for the investigation of passive vibration control using dual loop controllers Proportional-Integral-Derivative (PID) with derivative (D) gain and Proportional – Derivative (PD) with Integral (I) controllers. The controllers are used as low pass filters. Simulation of the models using Matlab-Simulink have been built in this work for torsional vibration control. A comparison between the two controllers with uncontrolled system have been carried out. Results show that the PD – I control is the best method which gives better stability response than the PID – D control.
Recently, numerous researches have emphasized the importance of professional inspection and repair in case of suspected faults in Photovoltaic (PV) systems. By leveraging electrical and environmental features, many machine learning models can provide valuable insights into the operational status of PV systems. In this study, different machine learning models for PV fault detection using a simulated 0.25MW PV power system were developed and evaluated. The training and testing datasets encompassed normal operation and various fault scenarios, including string-to-string, on-string, and string-to-ground faults. Multiple electrical and environmental variables were measured and exploited as features, such as current, voltage, power, temperature, and irradiance. Four algorithms (Tree, LDA, SVM, and ANN) were tested using 5-fold cross-validation to identify errors in the PV system. The performance evaluation of the models revealed promising results, with all algorithms demonstrating high accuracy. The Tree and LDA algorithms exhibited the best performance, achieving accuracies of 99.544% on the training data and 98.058% on the testing data. LDA achieved perfect accuracy (100%) on the testing data, while SVM and ANN achieved 95.145% and 89.320% accuracy, respectively. These findings underscore the potential of machine learning algorithms in accurately detecting and classifying various types of PV faults. .
This paper presents a case study on transmission pricing practices. Now a days, restructuring of the power system market through deregulation is gaining attention as technical and economical benefits at generator and user. In India, after the Electricity Act 2003, restructuring has been introduced in the Indian power system market. Researchers are continuously working towards improvement of deregulation based on restructuring to improve transmission pricing practices and calculations in a better way. Therefore, this paper presents an overview of MW- Mile and postage stamp methods to estimate the transmission cost. Further, the North Indian practical power system of 37 bus test system has been analyzed by reverse, absolute and dominant Mw-Mile methods. The results obtained to be expected for deregulated power market.
Correct calculations of losses are important for several reasons. There are two basic methods that can be used to calculate technical energy losses, a method based on subtraction of metered energy purchased and metered energy sold to customers and a method based on modeling losses in individual components of the system. For considering the technical loss in distribution system included: transmission line losses, power transformer losses, distribution line losses and low-voltage transformer losses. This work presents an evaluation of the power losses in Kirkuk electric distribution system area and submit proposals and appropriate solutions and suggestions to reduce the losses . A program under Visual Basic was designed to calculate and evaluate electrical energy losses in electrical power systems.
Gas or liquefied petroleum gas (LPG) is a chemical substance resultant from petroleum and could be dangerous in industrial places or those that deal with this substance. Gas leakage causes many health issues. So, to prevent such catastrophes and in order to maintain a clean air environment, the workspace atmosphere should be frequently monitored and controlled. The proposed monitoring gas leakage detector system is based on Internet of Things (IoT) technology. NodeMCU ESP8266 Wi-Fi is used to be the microcontroller for the whole system. The combustible gas sensor (MQ2) is used in order to detect the presence of methane (CH4) and carbon monoxide gas (CO). MQ2 sensor will detect the concentration of the gas according to the voltage output of the sensor and the ESP8266 will send the data reading from the gas sensor to Blynk IoT platform over an IOS phone; data visualization is done using Thingspeak IoT Platform. Besides, a fan will immediately work upon the leakage occurs along with an alarming buzzer.
This paper proposes a low-cost Light Emitting Diodes (LED) system with a novel arrangement that allows an indoor multi- robot localization. The proposed system uses only a matrix of low-cost LED installed uniformly on the ground of an environment and low-cost Light Dependent Resistor (LDR), each equipped on bottom of the robot for detection. The matrix of LEDs which are driven by a modified binary search algorithm are used as active beacons. The robot localizes itself based on the signals it receives from a group of neighbor LEDs. The minimum bounded circle algorithm is used to draw a virtual circle from the information collected from the neighbor LEDs and the center of this circle represents the robot’s location. The propose system is practically implemented on an environment with (16*16) matrix of LEDs. The experimental results show good performance in the localization process.
Mathematical modeling is very effective method to investigate interaction between insulin and glucose. In this paper, a new mathematical model for insulin-glucose regulation system is introduced based on well-known Lokta-Volterra model. Chaos is a common property in complex biological systems in the previous studies. The results here are in accordance with previous ones and indicating that insulin-glucose regulating system has many dynamics in different situations. The overall result of this paper may be helpful for better understanding of diabetes mellitus regulation system including diseases such as hyperinsulinemia and Type1 DM.
Competitive trend towards restructuring and unbundling of transmission services has resulted in the need renteto discover the impact of a particular generator to load. This paper initially presents the analysis of three diff reactive power valuation methods namely, Modified Y bus , Virtual flow approach and Modified Power flow tracing to compute the reactive power output from a particular generator to particular load. Among these methods, the modified power flow electricity tracing method is identified as the best because of its various features. Secondly, based on this Method, the opportunity cost for practical system is determined. Hence, this method can be useful in providing additional insight into power system operation and can be used to modify existing tariffs of charging for reactive power transmission loss and reactive power transmission services. Simulation and comparison results are shown by taking IEEE 30 bus system as test system.
Large disturbances in an induction generator-based wind system necessitate rapid compensation for the reactive power. This article addresses the application of Static Synchronous Compensator (STATCOM) in optimizing the performance of grid connected wind power system. The functionality of the static synchronous compensator in maintaining system stability and reliability during/post diverse severe disturbances is thoroughly investigated. A design procedure for STATCOM, particularly the capacitor in the DC side was advised.
The reliability of power system under fault susceptible environment has become major challenge for the power sector units. The injection of renewable power source has increased the complexity for distribution system and to deal with massive network, evolution of smart-grid has been enforced, which works in an automated fashion to improve overall reliability, efficiency and quality of the system. Proactive Self-healing is a critical feature of smart-grid. This paper tries to explain the concept sensing the occurrence of fault beforehand and providing possible solution for self-healing in smart grid. The fundamental base for incorporating afore discussed technology viz. understanding nature of fault, sources of fault and implementation of effective measuring techniques are enumerated in paper briefly. Support required in terms of technology is reviewed towards the end followed by a case study of practical implementation of self-healing control in a distribution system.
Most Internet of Vehicles (IoV) applications are delay-sensitive and require resources for data storage and tasks processing, which is very difficult to afford by vehicles. Such tasks are often offloaded to more powerful entities, like cloud and fog servers. Fog computing is decentralized infrastructure located between data source and cloud, supplies several benefits that make it a non-frivolous extension of the cloud. The high volume data which is generated by vehicles’ sensors and also the limited computation capabilities of vehicles have imposed several challenges on VANETs systems. Therefore, VANETs is integrated with fog computing to form a paradigm namely Vehicular Fog Computing (VFC) which provide low-latency services to mobile vehicles. Several studies have tackled the task offloading problem in the VFC field. However, recent studies have not carefully addressed the transmission path to the destination node and did not consider the energy consumption of vehicles. This paper aims to optimize the task offloading process in the VFC system in terms of latency and energy objectives under deadline constraint by adopting a Multi-Objective Evolutionary Algorithm (MOEA). Road Side Units (RSUs) x-Vehicles Mutli- Objective Computation offloading method (RxV-MOC) is proposed, where an elite of vehicles are utilized as fog nodes for tasks execution and all vehicles in the system are utilized for tasks transmission. The well-known Dijkstra's algorithm is adopted to find the minimum path between each two nodes. The simulation results show that the RxV-MOC has reduced significantly the energy consumption and latency for the VFC system in comparison with First-Fit algorithm, Best-Fit algorithm, and the MOC method.
Data hiding, a form of steganography, embeds data into digital media for the purpose of identification, annotation, security, and copyright. The goal of steganography is to avoid drawing suspicion to the transmission of a hidden message. Digital audio provides a suitable cover for high-throughput steganography. In this paper a high robustness system against the attackers in hiding of color images is presented. We used the multi-resolution discrete wavelet transform in hiding process. The JPEG format type for color images and WAV format for speech cover signal that used in test of system. Programs and graphics are executed by using MATLAB version 6.5 programs.
Development of distribution systems result in higher system losses and poor voltage regulation. Consequently, an efficient and effective distribution system has become more urgent and important. Hence proper selection of conductors in the distribution system is important as it determines the current density and the resistance of the line. This paper examines the use of different evolutionary algorithms, genetic algorithm (GA), to optimal branch conductor selection in planning radial distribution systems with the objective to minimize the overall cost of annual energy losses and depreciation on the cost of conductors and reliability in order to improve productivity. Furthermore, The Backward-Forward sweep iterative method was adopted to solve the radial load flow analysis. Simulations are carried out on 69-bus radial distribution network using GA approach in order to show the accuracy as well as the efficiency of the proposed solution technique.
SARS-COV-2 (severe acute respiratory syndrome coronavirus-2) has caused widespread mortality. Infected individuals had specific radiographic visual features and fever, dry cough, lethargy, dyspnea, and other symptoms. According to the study, the chest X-ray (CXR) is one of the essential non-invasive clinical adjuncts for detecting such visual reactions associated with SARS-COV-2. Manual diagnosis is hindered by a lack of radiologists' availability to interpret CXR images and by the faint appearance of illness radiographic responses. The paper describes an automatic COVID detection based on the deep learning- based system that applied transfer learning techniques to extract features from CXR images to distinguish. The system has three main components. The first part is extracting CXR features with MobileNetV2. The second part used the extracted features and applied Dimensionality reduction using LDA. The final part is a Classifier, which employed XGBoost to classify dataset images into Normal, Pneumonia, and Covid-19. The proposed system achieved both immediate and high results with an overall accuracy of 0.96%, precision of 0.95%, recall of 0.94%, and F1 score of 0.94%.
This paper presents an insufficient cyclic prefix (CP) Orthogonal Frequency Division Multiplexing (OFDM) system with equalizer whose coefficients are calculated using Least Mean Square (LMS) algorithm. The OFDM signal is passed through a channel with four multipath signals which cause the OFDM signal to be under high inter-symbol interference (ISI) and inter-carrier interference (ICI).8-QAM and 16-QAM digital modulation techniques are used to evaluate the performance of the proposed system. The simulation results have accentuated the high performance of the LMS equalizer via comparing its Bit Error Rate (BER) and constellation diagram with those of the Minimum Mean Square Error and Zero Forcing equalizers. Moreover, the results also reveal that the LMS equalizer provides BER performance close to that of the OFDM system with a hypothetical sufficient CP.
the proposed design offers a complete solution to support and surveillance vehicles remotely. The offered algorithm allows a monitoring center to track vehicles; diagnoses fault remotely, control the traffic and control CO emission. The system is programmed to scan the on-board diagnostic OBD periodically or based on request to check if there are any faults and read all the available sensors, then make an early fault prediction based on the sensor readings, an experience with the vehicle type and fault history. It is so useful for people who are not familiar with fault diagnosis as well as the maintenance center. The system offers tracking the vehicle remotely, which protects it against theft and warn the driver if it exceeds the speed limit according to its location. Finally, it allows the user to report any traffic congestion and allow s a vehicle navigator to be up to date with the traffic condition based on the other system’s user feedback.
The aim of this paper is to design and evaluate hop calculations and system performance for line of sight (LOS) radio relay links utilizing a simplified proposed procedure. Such a procedure is simulated for the determination of both hop calculations and system performance. The practical procedure of this paper has been ordered in a manner to solve up to 95% of the hop design problems encountered in practice. Two examples with different specifications and different required outage time are examined to fulfill the Committee Consultative International Radio (CCIR) recommendations.
This paper investigates Load Frequency Control of multi area inter connected power system having different turbines with PID controller. The gain values of controller are optimized using different Metaheuristic Algorithms. The performance and validity of designed controllers were checked on multi area interconnected power system with various Step Load Perturbations. Finally, the performance of proposed controllers was compared with conventional controller and from the result it was proved that the proposed controller exhibits superior performance than conventional controller for various Step Load Perturbations.
This paper concerns with exploitation of renewable energy sources for meeting energy requirements of remote locations. It presents an investigation which is based on a practical project that was executed in collaboration between academia and industry. It involves design and installation of a prototype integrated renewable energy system which consists of two 15 kW wind turbines, electrolyser, fuel cell system (FCS) and the associated control equipment. It was installed at the furthest island of Shetland, North of Scotland, U.K. The philosophy used in designing this system is summarised as follows: During times of high wind, the electricity generated by wind turbines is normally greater than that required by site electrical load. The excessive amount of generated electricity is stored into Hydrogen by utilising an electrolyser which is then used to generate the deficient electric power by the FCS at times of low wind.
Face recognition is the technology that verifies or recognizes faces from images, videos, or real-time streams. It can be used in security or employee attendance systems. Face recognition systems may encounter some attacks that reduce their ability to recognize faces properly. So, many noisy images mixed with original ones lead to confusion in the results. Various attacks that exploit this weakness affect the face recognition systems such as Fast Gradient Sign Method (FGSM), Deep Fool, and Projected Gradient Descent (PGD). This paper proposes a method to protect the face recognition system against these attacks by distorting images through different attacks, then training the recognition deep network model, specifically Convolutional Neural Network (CNN), using the original and distorted images. Diverse experiments have been conducted using combinations of original and distorted images to test the effectiveness of the system. The system showed an accuracy of 93% using FGSM attack, 97% using deep fool, and 95% using PGD.
The continuously ever-growing demand for the electrical power causing the continuous expansion and complexity of power systems, environmental and economic factors forcing the system to work near the critical limits of stability, so research's stability have become research areas worthy of attention in the resent day. The present work includes two phases: The first one is to determine the Voltage Stability Index for the more insensitive load bus to the voltage collapse in an interconnected power system using fast analyzed method based on separate voltage and current for PQ buses from these of PV buses, while the second phase is to suggested a simulated optimization technique for optimal voltage stability profile all around the power system. The optimization technique is used to adjust the control variables elements: Generator voltage magnitude, active power of PV buses, VAR of shunt capacitor banks and the position of transformers tap with satisfied the limit of the state variables (load voltages, generator reactive power and the active power of the slack bus). These control variables are main effect on the voltage stability profile to reach the peak prospect voltage stable loading with acceptable voltage profile. An optimized voltage collapse based on Particle Swarm Optimization has been tested on both of the IEEE 6 bus system and the Iraqi Extra High Voltage 400 kV Grid 28 bus . To ensure the effectiveness of the optimization technique a comparison between the stability indexes for load buses before and after technical application are presented. Simulation results have been executed using Matlab software). Keyword: Voltage Stability Indicator; voltage collapse; Stability of Extra High Voltage Grid; PSO optimization technique.
The drastic increase of residential load consumption in recent years result in over loading feeder lines and transformers for the Iraqi northern area distribution system especially in the city of Mosul. Solution for this problem require up to date research consumers load study to find the proper solution to stop excess overload in the transformers and the feeders. This paper include the regional survey for samples of consumers representing typical types of different standard of living and energy consumption by distributing questioners contain list of information such as load type in daily use. Also current readings are recorded for the individual consumer for the months of the year 2006. In addition to those readings, energy consumption is recorded once every two months. The registered readings are used in conjunction with the list of questionnaires to find a sample (for different loads) that coincide with the list of questionnaires for current and energy readings. Resulting in the feasibility of using the sample to know the peak value of current for any consumer even if he is not included in the list of questionnaires and for any new consumer, since it become possible to decide the size of the transformers and feeder lines, to overcome the problem of overloading in any part of the distribution system. The Artificial Neural Network (ANN) is used in this paper to find the above mentioned sample.
In this work, a healthcare monitoring system-based Internet of Medical Things (IoMT) is proposed, implemented, analyze it by artificial intelligence using fuzzy logic. Atmega microcontroller was used to achieve the function of the proposed work and provide the area for monitoring and Analytic(decision) to the caretakers or doctors through putting the results in the platform. In this paper, the heart rate pulse sensor and infrared temperature sensor are chosen, which give skin temperature and room temperature to provide their results to the caretaker. The decision that gives the patient is in a normal state, or the fuzzy logic does an abnormal state or risk state. The fuzzy logic is used for it accurate and fast in processing data and gives a result very closer to the reality in smart health services. IoMT enables the doctors and caretakers to monitor the patient easily at any time and any place by using their intelligent laptops, tablets, and phones. Finally, the proposed system can contribute to the construction of a wide healthcare monitoring system in the unit or in the department that follows on for the hospital. Therefore, Doctors can improve the accuracy of the diagnosis, as they receive all the patient data necessary.
In this paper, high tracking performance control structure for rigid robot manipulator is proposed. PD-like Sugano type fuzzy system is used as a main controller, while fuzzy-neural network (FNN) is used as a compensator for uncertainties by minimizing suitable function. The output of FNN is added to the reference trajectories to modify input error space, so that the system robust to any change in system parameters. The proposed structure is simulated and compared with computed torque controller. The simulation study has showed the validity of our structure, also showed its superiority to computed torque controller.
This paper applied an artificial intelligence technique to control Variable Speed in a wind generator system. One of these techniques is an offline Artificial Neural Network (ANN-based system identification methodology, and applied conventional proportional-integral-derivative (PID) controller). ANN-based model predictive (MPC) and remarks linearization (NARMA-L2) controllers are designed, and employed to manipulate Variable Speed in the wind technological knowledge system. All parameters of controllers are set up by the necessities of the controller's design. The effects show a neural local (NARMA-L2) can attribute even higher than PID. The settling time, upward jab time, and most overshoot of the response of NARMA-L2 is a notable deal an awful lot less than the corresponding factors for the accepted PID controller. The conclusion from this paper can be to utilize synthetic neural networks of industrial elements and sturdy manageable to be viewed as a dependable desire to normal modeling, simulation, and manipulation methodologies. The model developed in this paper can be used offline to structure and manufacturing points of conditions monitoring, faults detection, and troubles shooting for wind generation systems.
In this article, a PD-type iterative learning control algorithm (ILC) is proposed to a nonlinear time-varying system for cases of measurement disturbances and the initial state errors. The proposed control approach uses a simple structure and has an easy implementation. The iterative learning controller was utilized to control a constant current source inverter (CSI) with pulse width modulation (PWM); subsequently the output current trajectory converged the sinusoidal reference signal and provided constant switching frequency. The learning controller's parameters were tuned using particle swarm optimization approach to get best optimal control for the system output. The tracking error limit is achieved using the convergence exploration. The proposed learning control scheme was robust against the error in initial conditions and disturbances which outcome from the system modeling inaccuracies and uncertainties. It could correct the distortion of the inverter output current waveform with less computation and less complexity. The proposed algorithm was proved mathematically and through computer simulation. The proposed optimal learning method demonstrated good performances.
In this article, a novel three dimensional chaotic systems is presented. An extensive analysis including Lyapunov exponents, dissipation, symmetry, rest points with their properties is introduced. An adaptive tracking control system for the proposed chaos system has been designed. Also, synchronization system for two identical systems has been designed. The simulation results showed the effectiveness of the designed tracking and synchronization control systems.
Traditional friction brakes can generate problems such as high braking temperature and pressure, cracking, and wear, leading to braking failure and user damage. Eddy current brake systems (contactless magnetic brakes) are one method used in motion applications. They are wear-free, less temperature-sensitive, quick, easy, and less susceptible to wheel lock, resulting in less brake failure due to the absence of physical contact between the magnet and disc. Important factors that can affect the performance of the braking system are the type of materials manufactured for the permanent magnets. This paper examines the performance of the permanent magnetic eddy current braking (PMECB) system. Different kinds of permanent magnets are proposed in this system to create eddy currents, which provide braking for the braking system is simulated using FEA software to demonstrate the efficiency of braking in terms of force production, energy dissipation, and overall performance findings demonstrated that permanent magnets consisting of neodymium, iron, and boron consistently provided the maximum braking effectiveness. The lowest efficiency is found in ferrite, which has the second-lowest efficiency behind samarium cobalt. This is because ferrite has a weaker magnetic field. Because of this, the PMECBS based on NdFeB magnets has higher power dissipation values, particularly at higher speeds.
This paper presents a novel approach, Equal Incremental fuel cost (λ-Concept) approach, for solving Multi Area Economic Dispatch (MAED) problem. It is a simple approach and developed from the basic observation of incremental fuel cost of an area. The proposed approach has been tested on 4-area system with four generators in each area and a large 2-area system consists of 120 generators. The suggested algorithm has been tested extensively by considering the different tie line power transfer limits and useful recommendations are provided. Further, the impact of tie line power transfer limits on total fuel cost is also discussed. It is found from the test cases that the proposed method is shown to be robust, very fast and extensible to include a large class of problems. The simulation results of the proposed method have been compared with the existing methods.
In this paper, a proposed control strategy is presented to improve the performance of the pulse width modulation (PWM) boost type rectifier when operating under different supply voltage conditions (balanced, unbalanced, and distorted three-phase supply voltages). The proposed control strategy is divided into two parts, the first part is voltage controller and the second part is current controller. In the voltage controller, Repetitive Controller (RC) is used to reduce the even order harmonics in the regulated output dc voltage so small output capacitor (filter) is used instead of large capacitor. RC also reduces the even order harmonics which appear in the reflected dc current (I MAX ), this leads to reduce the odd order harmonics which appear in the input currents. While in the current controller, Enhanced Phase Locked Loop (EPLL) technique is used to obtain sinusoidal and balanced three phases, to construct the reference currents, which are in phase with the fundamental supply voltages. Therefore, the supply-side power factor is kept close to unity. A proportional controller is used to give excellent tracking between the line and the reference currents. The complete system with the proposed control strategy are simulated using Matlab/Simulink. The results for the complete system using repetitive voltage controller are obtained and compared to the results of the system with the conventional voltage controller (Proportional-Integral (PI) controller connected in series with a Low Pass Filter (LPF)). The results with the repetitive controller show better response and stable operation in the steady state under different input voltage conditions, as well as in the transient response under changing the load condition. — Enhanced Phase Locked Loop,Repetitive Controller,Three-Phase PWM Boost Rectifier, Proportional-Integral controller. I. INTRODUCTION The boost type PWM rectifier has been increasingly employed in recent years since it offers the possibility of a low distortion line current withnear unity power factor for any load condition. Another advantage over traditional phase-controlled thyristor rectifiers is its capability for nearly instantaneous reversal of power flow. Unfortunately, the features of the PWM boost type rectifier are fully realized only when the supply three phase input voltages are balanced. It has been shown that unbalanced input voltages cause an abnormal second order harmonic at the dc output voltage, which reflects back to the input causing third-order harmonic current to flow. Next, the third-order harmonic current causes a fourth-order harmonic voltage on the dc bus, and so on. This results in the appearance of even harmonics at the dc output and odd harmonics in the input currents. An attempt was made to reduce low order harmonics at the input and the output of the PWM Boost Type Rectifier under unbalance input voltages [1]. The authors in [2] used two synchronous reference frames: a positive- sequence current regulated by a
In this paper, we present a new programmable chaotic circuit based on the dynamical chaotic system introduced by E. Lorenz. The design and realization of the model are accomplished by using a programmable logic controller (PLC). The system can be modeled and realized with a structured texted. The nonlinear differential equations of Lorenz model are solved numerically. The generated chaotic signal by using PLC is applied to a single- phase induction motor via a variable frequency drive to create a chaotic perturbation in the experiments of liquid mixing. Colorization liquid experiments shows that the generated chaotic motion effectively makes an enhancement of the mixing process in the stirred-tank mixer model in our laboratory.
Linearization sensors characteristics becomes very interest field for researchers due to the importance in enhance the system performance, measurement accuracy, system design simplicity (hardware and software), reduce system cost, ..etc. in this paper, two approaches has been introduced in order to linearize the sensor characteristics; first is signal condition circuit based on lock up table (LUT) which this method performed for linearize NTC sensor characteristic. Second is ratiometric measurement equation which this method performed for linearize LVDT sensor characteristic. The proposed methods has been simulated by MATLAB, and then implemented by using Anadigm AN221E04 Field Programmable Analog Array (FPAA) development kit which several experiments performed in order to improve the performance of these approaches.
Preserving privacy and security plays a key role in allowing each component in the healthcare system to access control and gain privileges for services and resources. Over recent years, there have been several role-based access control and authentication schemes, but we noticed some drawbacks in target schemes such as failing to resist well-known attacks, leaking privacy-related information, and operational cost. To defeat the weakness, this paper proposes a secure electronic healthcare record scheme based on Schnorr Signcryption, crypto hash function, and Distributed Global Database (DGDB) for the healthcare system. Based on security theories and the Canetti-Krawczyk model (CK), we notice that the proposed scheme has suitable matrices such as scalability, privacy preservation, and mutual authentication. Furthermore, findings from comparisons with comparable schemes reveal that the suggested approach provides greater privacy and security characteristics than the other schemes and has enough efficiency in computational and communicational aspects.
The learning process in online lectures through the Learning Management System (LMS) will produce a learning flow according to the event log. Assessment in a group of parallel classes is expected to produce the same assessment point of view based on the semester lesson plan. However, it does not rule out the implementation of each class to produce unequal fairness. Some of the factors considered to influence the assessment in the classroom include the flow of learning, different lecturers, class composition, time and type of assessment, and student attendance. The implementation of process mining in fairness assessment is used to determine the extent to which the learning flow plays a role in the assessment of ten parallel classes, including international classes. Moreover, a decision tree algorithm will also be applied to determine the root cause of the student assessment analysis based on the causal factors. As a result, there are three variables that have effects on student graduation and assessment, i.e attendance, class and gender. Variable lecturer does not have much impact on the assessment, but has an influence on the learning flow.
This work deals with the simulation model of multi-machines system as cold rolling mill is considered as application. Drivers of rolling system are a set of DC motors, which have extend applications in factories as aluminum rolling. Interconnection of multi DC motors in such a way that they are synchronized in their rotational speed. In cold rolling, the accuracy of the strip exit thickness is a very important factors. To realize accuracy in the strip exit thickness, Automatic Gauge Control system is used. In this paper MATLAB/SIMULINK models are proposed and implemented for the entire structures. Simulation results were presented to verify proposed model of cold rolling mill.
In this study, a distributed power control algorithm is proposed for Dynamic Frequency Hopping Optical-CDMA (DFH-OCDMA) system. In general, the DFH-OCDMA can support higher number of simultaneous users compared to other OCDMA techniques. However, the performance of such system degrades significantly as the received power does lower than its minimum threshold. This may obviously occur in a DFH-OCDMA network with near-far problem which consist of different fiber lengths among the users, that resulting to unequal power attenuation. The power misdistribution among simultaneous active users at the star coupler would degrade the Bit Error Rate (BER) performance for users whose transmitting signals with longer fiber lengths. In order to solve these problems, we propose an adaptive distributed power control technique for DFH-OCDMA to satisfy the target Signal to Noise Ratio (S to R) for all users. Taking into account the noise effects of Multiple Access Interference (MAI), Phase Induced Intensity oise (PII) and shot noise, the system can support 100% of users with power control as compared to 33% without power control when the initial transmitted power was -1dBm with 30 simultaneous users.
This paper deals with the application of Fuzzy-Neural Networks (FNNs) in multi-machine system control applied on hot steel rolling. The electrical drives that used in rolling system are a set of three-phase induction motors (IM) controlled by indirect field-oriented control (IFO). The fundamental goal of this type of control is to eliminate the coupling influence though the coordinate transformation in order to make the AC motor behaves like a separately excited DC motor. Then use Fuzzy-Neural Network in control the IM speed and the rolling plant. In this work MATLAB/SIMULINK models are proposed and implemented for the entire structures. Simulation results are presented to verify the effectiveness of the proposed control schemes. It is found that the proposed system is robust in that it eliminates the disturbances considerably.
The tremendous development in the field of communications is derived from the increasing demand for fast transmission and processing of huge amounts of data. The non-orthogonal multiple access (NOMA) system was proposed to increase spectral efficiency (SE) and improve energy efficiency (EE) as well as contribute to preserving the environment and reducing pollution. In the NOMA system, a user may be considered as a relay to the others that support the coverage area based on adopting the reuse of the frequency technique. This cooperation enhances the spectral efficiency, however, in the cell, there are other users that may affect the spectral allocation that should be taken into consideration. Therefore, this paper is conducted to analyze the case when three users are available to play as relies upon. The analyses are performed in terms of the transmitted power allocation in a fair manner, and the system's performance is analyzed using the achievable data rates and the probability of an outage. The results showed an improvement in throughputs for the second and third users, as its value ranged from 7.57 bps/Hz to 12.55 bps/Hz for the second user and a quasi-fixed value of 1,292 bps/Hz for the third user at the transmitted power ranging from zero to 30 dBm.
In this paper, a combined RBF neural network sliding mode control and PD adaptive tracking controller is proposed for controlling the directional heading course of a ship. Due to the high nonlinearity and uncertainty of the ship dynamics as well as the effect of wave disturbances a performance evaluation and ship controller design is stay difficult task. The Neural network used for adaptively learn the uncertain dynamics bounds of the ship and their output used as part of the control law moreover the PD term is used to reduce the effect of the approximation error inherited in the RBF networks. The stability of the system with the combined control law guaranteed through Lyapunov analysis. Numeric simulation results confirm the proposed controller provide good system stability and convergence.
A theoretical analysis is presented to calculate the signal phase shift and the gain coefficient associated with two-wave mixing in photorefractive crystals subjected to an external electric field. The relative position of the induced-refractive index grating with respect to the fringe pattern of the two input optical beams leads to a coupling effect between the phase and intensity of these beams. An optical logic operation system that is based on photorefractive two-wave mixing is introduced. This system uses the fringe-shifting techniques that are executed by a Mach-Zehnder interferometer. The proposed system configurations are capable of producing all the basic 16 two-operand Boolean functions simultaneously at different output planes.
in recent years popularity of smart Home has been increasing due to low price and simplicity through tablet and Smartphone connectivity. It is an automation of house or home activity. Raspberry Pi3 is a small computer with digital input output capability and it was introduced in 2016; input/output ability besides the availability of all computer features make this system very suitable to be central unit can for smart home. Smart Home may contain centralize controller which control heating, lightning, ventilation in the home, HAVC( Heating, Ventilation and air conditioning),Safety locks of gates, doors and other system to provide improve comfort, better energy efficiency and security. The aim of this Paper is to develop a smart home application using RPi3, wemose-d1 and GSM. Programming has been developed in C++ in wemose-d1 and Python environment for RPi3 operation. The MQTT (Message Queuing Telemetry Transport protocol) technologic used to connect between raspberry pi3 and nodes.
This Paper presents a novel hardware design methodology of digital control systems. For this, instead of synthesizing the control system using Very high speed integration circuit Hardware Description Language (VHDL), LabVIEW FPGA module from National Instrument (NI) is used to design the whole system that include analog capture circuit to take out the analog signals (set point and process variable) from the real world, PID controller module, and PWM signal generator module to drive the motor. The physical implementation of the digital system is based on Spartan-3E FPGA from Xilinx. Simulation studies of speed control of a D.C. motor are conducted and the effect of a sudden change in reference speed and load are also included.
Iris pattern is one of the most important biological traits of humans. In last years, the iris pattern is used for human verification because of uniqueness of its texture. In this paper, biometric system based iris recognition is designed and implemented using two comparative approaches. The first approach is the Fourier descriptors, in this method the iris features have been extracted in frequency domain, where the low spectrums define the general description of iris pattern, while the high spectrums describes the fine detail. The second approach, the principle component analysis uses statistic technique to select the most important feature values by reducing its dimensionality. The biometric system is tested by applying one-to-one pattern matching procedure for 50 persons. The distance measurement method is applied for Manhattan, Euclidean, and Cosine classifiers for purpose of comparison. In all three classification methods, Fourier descriptors were always advanced principle component analysis in matching results. It satisfied 96%, 94%, and 86% correct matching against 94%, 92%, and 80% for principle component analysis using Manhattan, Euclidean, and Cosine classifiers respectively.
Growing interests in nature-inspired computing and bio-inspired optimization techniques have led to powerful tools for solving learning problems and analyzing large datasets. Several methods have been utilized to create superior performance-based optimization algorithms. However, certain applications, like nonlinear real-time, are difficult to explain using accurate mathematical models. Such large-scale combination and highly nonlinear modeling problems are solved by usage of soft computing techniques. So, in this paper, the researchers have tried to incorporate one of the most advanced plant algorithms known as Venus Flytrap Plant algorithm(VFO) along with soft-computing techniques and, to be specific, the ANFIS inverse model-Adaptive Neural Fuzzy Inference System for controlling the real-time temperature of a microwave cavity that heats oil. The MATLAB was integrated successfully with the LabVIEW platform. Wide ranges of input and output variables were experimented with. Problems were encountered due to heating system conditions like reflected power, variations in oil temperature, and oil inlet absorption and cavity temperatures affecting the oil temperature, besides the temperature’s effect on viscosity. The LabVIEW design followed and the results figure in the performance of the VFO- Inverse ANFIS controller.
Given the role that pipelines play in transporting crude oil, which is considered the basis of the global economy and across different environments, hundreds of studies revolve around providing the necessary protection for it. Various technologies have been employed in this pursuit, differing in terms of cost, reliability, and efficiency, among other factors. Computer vision has emerged as a prominent technique in this field, albeit requiring a robust image-processing algorithm for spill detection. This study employs image segmentation techniques to enable the computer to interpret visual information and images effectively. The research focuses on detecting spills in oil pipes caused by leakage, utilizing images captured by a drone equipped with a Raspberry Pi and Pi camera. These images, along with their global positioning system (GPS) location, are transmitted to the base station using the message queuing telemetry transport Internet of Things (MQTT IoT) protocol. At the base station, deep learning techniques, specifically Holistically-Nested Edge Detection (HED) and extreme inception (Xception) networks, are employed for image processing to identify contours. The proposed algorithm can detect multiple contours in the images. To pinpoint a contour with a black color, representative of an oil spill, the CIELAB color space (LAB) algorithm effectively removes shadow effects. If a contour is detected, its area and perimeter are calculated to determine whether it exceeds a certain threshold. The effectiveness of the proposed system was tested on Iraqi oil pipeline systems, demonstrating its capability to detect spills of different sizes.
This paper presents a new strategy of sticky bomb detection. The detection strategy is based on measuring the magnetic field around the targeted car using compass device. A compass measure the earth gravitation of the car as (x,y,z) coordination , a threshold value of magnetic fields around the targeted car are recorded. If a difference is detected with any (x,y,z) coordination, an alert SMS message is sent to the car's owner. The detection system presented in this paper has been implemented based on Arduino board. The alarm signal is a Short Message Service (SMS) through Global System for Mobile Communication (GSM) module. The proposed method can gives the people of unstable countries a chance to discover whether their cars have been trapped with an IED bomb or their car still safe.
Detecting pulmonary cancers at early stages is difficult but crucial for patient survival. Therefore, it is essential to develop an intelligent, autonomous, and accurate lung cancer detection system that shows great reliability compared to previous systems and research. In this study, we have developed an innovative lung cancer detection system known as the Hybrid Lung Cancer Stage Classifier and Diagnosis Model (Hybrid-LCSCDM). This system simplifies the complex task of diagnosing lung cancer by categorizing patients into three classes: normal, benign, and malignant, by analyzing computed tomography (CT) scans using a two-part approach: First, feature extraction is conducted using a pre-trained model called VGG-16 for detecting key features in lung CT scans indicative of cancer. Second, these features are then classified using a machine learning technique called XGBoost, which sorts the scans into three categories. A dataset, IQ-OTH/NCCD - Lung Cancer, is used to train and evaluate the proposed model to show its effectiveness. The dataset consists of the three aforementioned classes containing 1190 images. Our suggested strategy achieved an overall accuracy of 98.54%, while the classification precision among the three classes was 98.63%. Considering the accuracy, recall, and precision as well as the F1-score evaluation metrics, the results indicated that when using solely computed tomography scans, the proposed (Hybrid-LCSCDM) model outperforms all previously published models.
This review article puts forward the phenomena of chaotic oscillation in electrical power systems. The aim is to present some short summaries written by distinguished researchers in the field of chaotic oscillation in power systems. The reviewed papers are classified according to the phenomena that cause the chaotic oscillations in electrical power systems. Modern electrical power systems are evolving day by day from small networks toward large-scale grids. Electrical power systems are constituted of multiple inter-linked together elements, such as synchronous generators, transformers, transmission lines, linear and nonlinear loads, and many other devices. Most of these components are inherently nonlinear in nature rendering the whole electrical power system as a complex nonlinear network. Nonlinear systems can evolve very complex dynamics such as static and dynamic bifurcations and may also behave chaotically. Chaos in electrical power systems is very unwanted as it can drive system bus voltage to instability and can lead to voltage collapse and ultimately cause a general blackout.
Solar power is environment friendly power source, but it is characterized by being highly dependent on the irradiation level witch is function of the sun position in the sky. To overcome this situation and extract maximum power from the sun, the PV array must be kept nearly perpendicular to the sun during the daytime. In this paper, a smart relay based sun tracking system has been designed and implemented to keep the PV array perpendicular to the sun during the day hours.