This paper presents and discusses a buck DC/DC converter control based on fuzzy logic approach, in which the fuzzy controller has been driven by voltage error signal and a current error signal for which the load current has been taken as a reference one. The validity of the proposed approach has been examined through starting the buck DC/DC converter at different loading and input voltages (to monitor the starting performances), exposing the converter into large load resistance and input voltage step variations (to explore its dynamic performance), in addition to step and smooth variation in the reference voltage (to see its ability in readjusting its operating point to comply with the new setting). The simulation results presented an excellent load & line regulations abilities in addition to a good reference tracking ability. It also showed the possibility of using the buck converter as smooth variable voltage source (under smooth reference voltage variations).
voltage sags represent the greatest threat to the sensitive loads of industrial consumers, the microprocessor based-loads, and any electrical sensitive components. In this paper, a special topology is proposed to mitigate deep and long duration sags by using a modified AC to AC boost converter with a new control method. A boost converter is redesigned with a single switch to produces an output voltage that is linearly proportional to the duty cycle of the switch. On the other hand, the proposed control system is based on introducing a mathematical model that relates the missing voltage to the duty cycle of the boost converter switch. The simulation results along with the system analysis are presented to confirm the effectiveness and feasibility of the proposed circuit.
Soft commutation techniques have been of great interest during the last few years in power supply switching applications. The recently developed Zero-Voltage transition (ZVT) and Zero-Current transition (ZCT) pulse width modulation (PWM) technique incorporated soft-switching function into PWM converters, so that the switching losses can be reduced with minimum voltage/current stresses and circulating energy. The ZCT technique can significantly reduce the switch turn-off loss which is usually the dominant switching loss in high-power applications. In this paper the steady state analysis and design of the ZCT PWM boost converter are introduced. Control and drive circuit have been designed to drive a 100 Watt ZCT PWM boost converter to experimentally investigate its features and characteristics.
Energy exchange between AC grid and DC supply that is a part of a hybrid electric micro-grid takes place using various power converter designs. The single-phase, single-stage, AC-DC power dual active bridge converter is one option. The phase-shift modulation is used to regulate energy flow in both directions. The topology of one stage AC-DC dual active bridge converter based in bidirectional switching modules has been introduced. This paper next introduces the analysis of the AC side current considering basic modulation functions and suggests an optimum phase-shifted modulation strategy. The proposed modulation function provides minimum harmonics distortion. A simulation study is presented to compare the proposed strategy to the basic sinusoidal and triangular modulation techniques. The results show that the modified modulation reduces the average THD by about 55% and 39% compared to the standard sinusoidal and triangular modulation strategies respectively and ensures linear relationship between the transferred power and magnitude control coefficient.
In this paper, a fuzzy based controller for boost type AC/DC converter has been presented. Its operation and performance have been investigated through its simulation in the environment of Mat Lab. The system has been tested under various loading conditions. The obtained results showed that this fuzzy based controller can effectively control the power factor and the harmonic contents of the current drawn from the power factor system distribution network.
In this paper, the vector-controlled Permanent Magnet Synchronous Motor (PMSM) fed by Indirect Matrix Converter (IMC) is analyzed, designed, and simulated by using the IMC with Carrier Based Pulse Width Modulation (CBPWM). The CBPWM strategy is based on Space Vector Pulse Width Modulation (SVPWM) analysis, it is used to enhance the input current waveform, reduce the complexity of switching signals generation, and to solve the commutation problem. The traditional PMSM drive system is simulated for comparison with proposed drive system. The proposed drive system is compared to the traditional drive system using the Total Harmonic Distortion (THD). The comparison results show that the proposed drive system outperform the traditional drive system by THD different of 1/30 of input current and 1/1.5 of stator current, with high input power factor.
This paper presents a proposed configuration of paralleling scheme PWM DC/DC buck converter. The topological structure and operation principles are presented. A Bode plot diagram technique is used to study the stability of the scheme for different values of controller parameters and with a number of parallel modules. It is found that the results are confidence, and the proposed scheme can be used in high power applications by increasing the number of parallel modules.
In this paper, a control strategy for a combination PV-BESS-SC hybrid system in islanded microgrid with a DC load is designed and analyzed using a new topology. Although Battery Energy Storage System (BESS) is employed to keep the DC bus voltage stable; however, it has a high energy density and a low power density. On the other hand, the Supercapacitor (SC) has a low energy density but a high-power density. As a result, combining a BESS and an SC is more efficient for power density and high energy. Integrating the many sources is more complicated. In order to integrate the SC and BESS and deliver continuous power to the load, a control strategy is required. A novel method for controlling the bus voltage and energy management will be proposed in this paper. The main advantage of the proposed system is that throughout the operation, the State of Charging (SOC), BESS current, and SC voltage and current are all kept within predetermined ranges. Additionally, SC balances fast- changing power surges, while BESS balances slow-changing power surges. Therefore, it enhances the life span and minimizes the current strains on BESS. To track the Maximum Power Point (MPP) or restrict power from the PV panel to the load, a unidirectional boost converter is utilized. Two buck converters coupled in parallel with a boost converter are proposed to charge the hybrid BESS-SC. Another two boost converters are used to manage the discharge operation of the BESS-SC storage in order to reduce losses. The simulation results show that the proposed control technique for rapid changes in load demand and PV generation is effective. In addition, the proposed technique control strategy is compared with a traditional control strategy.
The increasing demand for electricity due to population expansion has led to frequent interruptions in electrical power, so there are backup power lines everywhere, especially in the sectors of education, health, banking, transportation and communications. DC sources are beginning to become widely spread in terms of low maintenance requirements, no need for refueling, and no pollutant emission in these institutions. The problems of DC systems are; losses in DC system components, and change in output voltage as loads change. This research presents a power system that generates 1760W AC power from batteries bank, the system consists of a twin inverter to reduce losses in switches and filters, and thus improving the efficiency and the power factor of the system, and fuzzy logic controllers to regulate the output voltage of the converter and inverter. Modeling and simulation in MATLAB / Simulink showed obtaining a constant load voltage with acceptable values of total harmonics distortion (THD) under different conditions of loads and batteries.
The occurrence of Sub-Synchronous Resonance (SSR) phenomena can be attributed to the interaction that takes place between wind turbine generators and series-compensated transmission lines. The Doubly-Fed Induction Generator (DFIG) is widely recognized as a prevalent generator form employed in wind energy conversion systems. The present paper commences with an extensive exposition on modal analysis techniques employed in a series of compensated wind farms featuring Doubly Fed Induction Generators (DFIGs). The system model encompasses various components, including the aerodynamics of a wind turbine, an induction generator characterized by a sixth-order model, a second- order two-mass shaft system, a series compensated transmission line described by a fourth-order model, controllers for the Rotor-Side Converter (RSC) and the Grid-Side Converter (GSC) represented by an eighth-order model, and a first-order DC-link model. The technique of eigenvalue-based SSR analysis is extensively utilized in various academic and research domains. The eigenvalue technique depends on the initial conditions of state variables to yield an accurate outcome. The non-iterative approach, previously employed for the computation of initial values of the state variables, has exhibited issues with convergence, lack of accuracy, and excessive computational time. The comparative study evaluates the time-domain simulation outcomes under different wind speeds and compensation levels, along side the eigenvalue analysis conducted using both the suggested and non-iterative methods. This comparative analysis is conducted to illustrate the proposed approach efficacy and precision. The results indicate that the eigenvalue analysis conducted using the proposed technique exhibits more accuracy, as it aligns with the findings of the simulations across all of the investigated instances. The process of validation is executed with the MATLAB program. Within the context of the investigation, it has been found that increasing compensation levels while simultaneously decreasing wind speed leads to system instability. Therefore, modifying the compensation level by the current wind speed is advisable.
The paper dells with a modified experimental prototype for pulse-width modulation (PWM) sliding mode control (SMC) applied to a DC-to-DC-boost converter operated in continuous conduction mode (CCM). Experimental results show that the proposed control schme provides good voltage regulation and is suitable for common DC-to-DC conversion purposes. The prototype and its implementation are given in detail. The static and dynamic performances of the The static and dynamic performances of the experimental system are recorded. Experimental results show that the proposed control scheme provides good voltage regulation and is suitable for common DC-to-DC conversion purposes.
A single phase boost rectifier circuit is studied with and without feedforward techniques. The circuit is implemented and tested experimentally. It can be operated at high power factor (greater than 0.99), and at line current total harmonic distortion (THD) (less than 0.06), by selecting a suitable control parameters at the desired output power.
This paper examines the use of non-integer switching frequency ratios in digitally controlled DC-DC converters. In particular the execution of multiple control algorithms using a Digital Signal Processor (DSP) for this application is analyzed. The variation in delay from when the Analog to Digital Converter (ADC) samples the output voltage to when the duty cycle is updated is identified as a critical factor to be considered when implementing the digital control system. Fixing the delay to its maximum value is found to produce reasonable performance using a conventional DSP. A modification of the DSP’s interrupt control logic is proposed here that minimizes the delay and thereby yields improved performance compared with that given by a standard interrupt controller. Applying this technique to a multi-rail power supply system provides the designer with the flexibility to choose arbitrary switching frequencies for individual converters, thereby allowing optimization of the efficiency and performance of the individual converters.
Microgrids (ℳ-grids) can be thought of as a small-scale electrical network comprised of a mix of Distributed Generation (DG) resources, storage devices, and a variety of load species. It provides communities with a stable, secure, and renewable energy supply in either off-grid (grid-forming) or on-grid (grid-following) mode. In this work, a control strategy of coordinated power management for a Low Voltage (LV) ℳ-grid with integration of solar Photovoltaic (PV), Battery Energy Storage System (BESS) and three phase loads operated autonomously or connected to the utility grid has been created and analyzed in the Matlab Simulink environment. The main goal expressed here is to achieve the following points: (i) grid following, grid forming modes, and resynchronization mode between them, (ii) Maximum Power Point Tracking (MPPT) from solar PV using fuzzy logic technique, and active power regulator based boost converter using a Proportional Integral (PI) controller is activated when a curtailment operation is required, (iii) ℳ-grid imbalance compensation (negative sequence) due to large single-phase load is activated, and (iv) detection and diagnosis the fault types using Discrete Wavelet Transform (DWT). Under the influence of irradiance fluctuation on solar plant, the proposed control technique demonstrates how the adopted system works in grid- following mode (PQ control), grid- formation, and grid resynchronization to seamlessly connect the ℳ-grid with the main distribution system. In this system, a power curtailment management system is introduced in the event of a significant reduction in load, allowing the control strategy to be switched from MPPT to PQ control, permitting the BESS to absorb excess power. Also, in grid-following mode, the BESS's imbalance compensation mechanism helps to reduce the negative sequence voltage that occurs at the Point of Common Coupling (PCC) bus as a result of an imbalance in the grid's power supply. In addition to the features described above, this system made use of DWT to detect and diagnose various fault conditions.
Soft-switching technique can substantially improve the performance of power converters, mainly due to the increase of switching frequency, that result in better modulation quality. This is more concerned particularly in the high power applications, where devices [gate turn off (GTO) or something else similar) can not operate over a few hundreds of hertz in conventional hard switching converter structures. In this paper, design and analysis of moderate power ZCT three-phase PWM inverter has been presented. Also, the designed inverter and its novel control circuit is implemented experimentally to investigate its characteristics with this new zero-current transition ZCT technique.
Multi-level inverters, as a result of the significant contributions they have made to the fields of high voltage and renewable energy applications, MLI has earned a prestigious place in the field of industrial electronics applications. The use of MLI makes it possible to generate an alternating voltage from a DC voltage or from voltages that are continuously applied thanks to this capability. The quality of the produced wave depends on minimizing the level of total harmonic distortion (THD) in the ensuing output voltage. Increasing the total number of levels is required in order to bring down the THD. The bigger the number of layers, the lower the THD. On the other hand, this necessitates an increase in the number of power switches that are utilized, in addition to an increase in the number of DC sources for certain types. A greater number of levels are achieved in this work with a reduced number of switches, and the DC source necessitates the use of specialized control over the switches as well as the grading of the DC source values. In order to demonstrate that the suggested converter achieves the needed outcomes, the MATLAB simulator is utilized.
This paper presents a design of a low cost, low loss 31-level multilevel inverter (MLI) topology with a reduce the number of switches and power electronic devices. The increase in the levels of MLI leads to limiting the THD to the desired value. The 31-level output voltage is created using four PV sources with a specific ratio. The SPWM is used to control the gating signals for the switches of MLI. The PV system is integrated into the MLI using a boost converter to maximize the power capacity of the solar cells and the Incremental Conductance (IC) algorithm is employed for maximum power point tracking (MPPT) of the PV system. Simulation results of 31-level MLI indicate the THD of voltage and current waveforms are 3.73% within an acceptable range of IEEE standards.