In this study, Dielectric Barrier Discharge plasma irradiation (DBD) is applied to treatment and improve the properties of the ZnO thin film deposited on the glass substrate as a sensor for glucose detection. The ZnO is prepared via a sol-gel method in this work. ZnO is irradiated by the DBD high voltage plasma to improve of its sensitivity. The optical properties, roughness and surface morphology of the waveguide coated ZnO thin films before and after DBD plasma irradiation are studied in this work. The results showed a significant improvement in the performance of the sensor in the detection of concentrations of glucose solution after plasma irradiation. Where the largest value in sensitivity was equal to 62.7 when the distance between electrodes was 5 cm compared to the sensitivity before irradiation, which was equal to 92. The high response showed in results demonstrating that the fabricated waveguide coated ZnO after plasma irradiation has the excellent potential application as a sensor to detect small concentration of glucose solution.
Chaotic Sine-Cosine Algorithms (CSCAs) are new metaheuristic optimization algorithms. However, Chaotic Sine-Cosine Algorithm (CSCAs) are able to manipulate the problems in the standard Sine-Cosine Algorithm (SCA) like, slow convergence rate and falling into local solutions. This manipulation is done by changing the random parameters in the standard Sine-Cosine Algorithm (SCA) with the chaotic sequences. To verify the ability of the Chaotic Sine-Cosine Algorithms (CSCAs) for solving problems with large scale problems. The behaviors of the Chaotic Sine-Cosine Algorithms (CSCAs) were studied under different dimensions 10, 30, 100, and 200. The results show the high quality solutions and the superiority of all Chaotic Sine-Cosine Algorithms (CSCAs) on the standard SCA algorithm for all selecting dimensions. Additionally, different initial values of the chaotic maps are used to study the sensitivity of Chaotic Sine-Cosine Algorithms (CSCAs). The sensitivity test reveals that the initial value 0.7 is the best option for all Chaotic Sine-Cosine Algorithms (CSCAs).
This paper presents a developed algorithm for reliability sensitivity analysis of engineering networks. Reliability Modeling is proposed for the Iraqi Kurdistan Regional Power Network (IKRPN) using Symbolic Reliability function of the model. The written Pascal code for the developed algorithm finds efficiently path sets and cut sets of the model. Reliability and Unreliability indices are found. The sensitivity of these indices are found with respect to the variation of the network’s elements reliabilities
This paper studies the impact of climate change on the electricity consumption by means of a fuzzy regression approach. The climate factors which have been considered in this paper are humidity and temperature, whereas the simultaneous effect of these two climate factors is considered. The impacts of other climate variables, like the wind, with a minor effect on energy consumption are ignored. The innovation which applies in this paper is the division of the year into two parts by using the temperature-day graph in the year. To index the humidity, data of the minimum humidity per day are used. For temperature, the maximum temperature of the first part of the year (warm days) and the minimum of the second part (cold days) are used. The indicator for the consumption is the daily peak load. The model results show high sensitivity to the temperature but low sensitivity to the humidity. Moreover, it is concluded that the model structure cannot be the same and for the cold par additional variables such as gas consumption should be considered.
Nowadays, multimedia communication has become very widespread and this requires it to be protected from attackers and transmitted securely for reliability. Encryption and decryption techniques are useful in providing effective security for speech signals to ensure that these signals are transmitted with secure data and prevent third parties or the public from reading private messages. Due to the rapid improvement in digital communications over the recent period up to the present, the security of voice data transmitted over various networks has been classified as a favored field of study in earlier years. The contributions to audio encryption are discussed in this review. This Comprehensive review mainly focuses on presenting several kinds of methods for audio encryption and decryption the analysis of these methods with their advantages and disadvantages have been investigated thoroughly. It will be classified into encryption based on traditional methods and encryption based on advanced chaotic systems. They are divided into two types, continuous-time system, and discrete-time system, and also classified based on the synchronization method and the implementation method. In the fields of information and communications security, system designers face many challenges in both cost, performance, and architecture design, Field Programmable gate arrays (FPGAs) provide an excellent balance between computational power and processing flexibility. In addition, encryption methods will be classified based on Chaos-based Pseudo Random Bit Generator, Fractional-order systems, and hybrid chaotic generator systems, which is an advantageous point for this review compared with previous ones. Audio algorithms are presented, discussed, and compared, highlighting important advantages and disadvantages. Audio signals have a large volume and a strong correlation between data samples. Therefore, if traditional cryptography systems are used to encrypt such huge data, they gain significant overhead. Standard symmetric encryption systems also have a small key-space, which makes them vulnerable to attacks. On the other hand, encryption by asymmetric algorithms is not ideal due to low processing speed and complexity. Therefore, great importance has been given to using chaotic theory to encode audio files. Therefore, when proposing an appropriate encryption method to ensure a high degree of security, the key space, which is the critical part of every encryption system, and the key sensitivity must be taken into account. The key sensitivity is related to the initial values and control variables of the chaotic system chosen as the audio encryption algorithm. In addition, the proposed algorithm should eliminate the problems of periodic windows, such as limited chaotic range and non-uniform distribution, and the quality of the recovered audio signal remains good, which confirms the convenience, reliability, and high security.
Experts and researchers in the field of information security have placed a high value on the security of image data in the last few years. They have presented several image encryption techniques that are more secure. To increase the security level of image encryption algorithms, this article offers an efficient diffusion approach for image encryption methods based on one- dimensional Logistic, three-dimensional Lorenz, DNA encoding and computing, and SHA-256. The encryption test demonstrates that the method has great security and reliability. This article, also, examines the security of encryption methods, such as secret key space analysis, key sensitivity test, histogram analysis, information entropy process, correlation examination, and differential attack. When the image encryption method described in this article is compared to several previous image encryption techniques, the encryption algorithm has higher information entropy and a lower correlation coefficient.
In this article, a robust control technique for 2-DOF helicopter system is presented. The 2-DOF helicopter system is 2 inputs and 2 outputs system that is suffering from the high nonlinearity and strong coupling. This paper focuses on design a simple, robust, and optimal controller for the helicopter system. Moreover, The proposed control method takes into account effects of the measurement noise in the closed loop system that effect on the performance of controller as well as the external disturbance. The proposed controller combines low pass filter with robust PID controller to ensure good tracking performance with high robustness. A low pass filter and PID controller are designed based H∞weighted mixed sensitivity. Nonlinear dynamic model of 2-DOF helicopter system linearized and then decoupled into pitch and yaw models. Finally, proposed controller applied for each model. Matlab program is used to check effectiveness the proposed control method. Simulation results show that the proposed controllers has best tracking performance with no overshot and the smallest settling time with respect to standard H∞and optimized PID controller.
In this work, the collective behavior of Artemia Salina is studied both experimentally and theoretically. Several experiments have been designed to investigate the Artemia motion under different environment conditions. From the results of such experiments, a strategy to control the direction of motion of an Artemia population, by exploiting their sensitivity to light, has been derived and then implemented.
In this paper, the effect of the grating parameters (i.e. gratings length (Lg) and the induced index profile (Δn)); the temperature variation (T) and the applied strain change on the fiber Bragg Grating (FBG) 3dB-bandwidth (i.e. full width-half maximum (FWHM)) have successfully investigated numerically using MATHCAD software. Results show that for Lg < 7 mm, the FBG 3dB-bandwidth (i.e. full width-half maximum (FWHM)) value shows a good reliable and visible impact. Otherwise, there are no significant effects except for increasing the FBG reflectivity. Also, results show that the FWHM value has affected by the change of the Δn value. In contrast, results show that there is no significant effect of the temperature on the FWHM value. Also, results shown that the dependence of the Bragg wavelength (λB) upon both strain and temperature variations is lies within the range of 0.462 – 0.470 fm με-1 °C-1
In recent years, symbolic analysis has become a well-established technique in circuit analysis and design. The symbolic expression of network characteristics offers convenience for frequency response analysis, sensitivity computation, and fault diagnosis. The aim of the paper is to present a method for symbolic analysis that depends on the use of the wavelet transform (WT) as a tool to accelerate the solution of the problem as compared with the numerical interpolation method that is based on the use of the fast Fourier transform (FFT).
This paper presents a numerical analysis for the effect of temperature variations on the strain response of polymer optical fiber (POF) Bragg gratings. Results show that the dependence of the Bragg wavelength (λ B ) upon strain and temperature variations for the POF Bragg gratings is lies within the range of 0.462 – 0.470 fm με -1 °C -1 compare with 0.14 – 0.15 fm με -1 °C -1 for the SOFs Bragg gratings. Also, results show that the strain response for the POF Bragg gratings changed on average by 1.034 ± 0.02fm με - important for strain sensor applications especially in the environments where the temperature change.
Epilepsy, a neurological disorder characterized by recurring seizures, necessitates early and precise detection for effective management. Deep learning techniques have emerged as powerful tools for analyzing complex medical data, specifically electroencephalogram (EEG) signals, advancing epileptic detection. This review comprehensively presents cutting-edge methodologies in deep learning-based epileptic detection systems. Beginning with an overview of epilepsy’s fundamental concepts and their implications for individuals and healthcare are present. This review then delves into deep learning principles and their application in processing EEG signals. Diverse research papers to know the architectures—convolutional neural networks, recurrent neural networks, and hybrid models—are investigated, emphasizing their strengths and limitations in detecting epilepsy. Preprocessing techniques for improving EEG data quality and reliability, such as noise reduction, artifact removal, and feature extraction, are discussed. Present performance evaluation metrics in epileptic detection, such as accuracy, sensitivity, specificity, and area under the curve, are provided. This review anticipates future directions by highlighting challenges such as dataset size and diversity, model interpretability, and integration with clinical decision support systems. Finally, this review demonstrates how deep learning can improve the precision, efficiency, and accessibility of early epileptic diagnosis. This advancement allows for more timely interventions and personalized treatment plans, potentially revolutionizing epilepsy management.
In recent years, symbolic analysis has become a well-established technique in circuit analysis and design. The symbolic expression of network characteristics offers convenience for frequency response analysis, sensitivity computation, and fault diagnosis. The aim of the paper is to present a method for symbolic analysis that depends on the use of the wavelet transform (WT) as a tool to accelerate the solution of the problem as compared with the numerical interpolation method that is based on the use of the fast Fourier transform (FFT).
The performance of power distribution systems (PDS) has improved greatly in recent times ever since the distributed generation (DG) unit was incorporated in PDS. DG integration effectively cuts down the line power losses (PL) and strengthens the bus voltages (BV) provided the size and place are optimized. Accordingly, in the present work, a hybrid optimization technique is implemented for incorporating a single DG unit into radial PDS. The proposed hybrid method is formed by integrating the active power loss sensitivity (APLS) index and whale optimization meta-heuristic algorithm. The ideal place and size for DG are optimized to minimize total real power losses (TLP) and enhance bus voltages (BV). The applicability of the proposed hybrid technique is analyzed for Type I and Type III DG installation in a balanced IEEE 33-bus and 69-bus radial PDS. Optimal inclusion of type I and III DG in a 33-bus radial test system cut down TLP by 51.85% and 70.02% respectively. Likewise, optimal placement of type I and III DG reduced TLP by 65.18%, and 90.40%, respectively for 69-bus radial PDS. The impact of DG installation on the performance of radial PDS has been analyzed and a comparative study is also presented to examine the sovereignty of the proposed hybrid method. The comparative study report outlined that the proposed hybrid method can be a better choice for solving DG optimization in radial PDS.
Minimization of active power losses is one of the essential aims for any electric utility, due to its importance in improvement of system properties towards minimum production cost and to support increase load requirement. In this paper we have studied the possibility of reducing the value of real power losses for (IEEE-14- Bus bar) global system transmission lines by choosing the best location to install shunt capacitor depending on new algorithm for calculate the optimal allocation, which considering the value of real power losses derivative with injection reactive power as an indicator of the ability of reducing losses at load buses. The results show the validity of this method for application in electric power transmission lines.
In recent years, wireless microrobots have gotten more attention due to their huge potential in the biomedical field, especially drug delivery. Microrobots have several benefits, including small size, low weight, sensitivity, and flexibility. These characteristics have led to microscale improvements in control systems and power delivery with the development of submillimeter-sized robots. Wireless control of individual mobile microrobots has been achieved using a variety of propulsion systems, and improving the actuation and navigation of microrobots will have a significant impact. On the other hand, actuation tools must be integrated and compatible with the human body to drive these untethered microrobots along predefined paths inside biological environments. This study investigated key microrobot components, including medical applications, actuation systems, control systems, and design schemes. The efficiency of a microrobot is impacted by many factors, including the material, structure, and environment of the microrobot. Furthermore, integrating a hybrid actuation system and multimodal imaging can increase the microrobot’s navigation effect, imaging algorithms, and working environment. In addition, taking into account the human body’s moving distance, autonomous actuating technology could be used to deliver microrobots precisely and quickly to a specific position using a combination of quick approaches.
Recently, chaos theory has been widely used in multimedia and digital communications due to its unique properties that can enhance security, data compression, and signal processing. It plays a significant role in securing digital images and protecting sensitive visual information from unauthorized access, tampering, and interception. In this regard, chaotic signals are used in image encryption to empower the security; that’s because chaotic systems are characterized by their sensitivity to initial conditions, and their unpredictable and seemingly random behavior. In particular, hyper-chaotic systems involve multiple chaotic systems interacting with each other. These systems can introduce more randomness and complexity, leading to stronger encryption techniques. In this paper, Hyper-chaotic Lorenz system is considered to design robust image encryption/ decryption system based on master-slave synchronization. Firstly, the rich dynamic characteristics of this system is studied using analytical and numerical nonlinear analysis tools. Next, the image secure system has been implemented through Field-Programmable Gate Arrays (FPGAs) Zedboard Zynq xc7z020-1clg484 to verify the image encryption/decryption directly on programmable hardware Kit. Numerical simulations, hardware implementation, and cryptanalysis tools are conducted to validate the effectiveness and robustness of the proposed system.