In this study, we propose a compact, tri-band microstrip patch antenna for 5G applications, operating at 28 GHz, 38 GHz, and 60 GHz frequency bands. Starting with a basic rectangular microstrip patch, modifications were made to achieve resonance in the target frequency bands and improve S11 performance, gain, and impedance bandwidth. An inset feed was employed to enhance antenna matching, and a π–shaped slot was incorporated into the radiating patch for better antenna characteristics. The design utilized a Rogers RT/Duroid-5880 substrate with a 0.508 mm thickness, a 2.2 dielectric constant, and a 0.0009 loss tangent. The final dimensions of the antenna are 8 x 8.5 x 0.508 mm3. The maximum S11 values obtained at the resonant frequencies of 27.9 GHz, 38.4 GHz, and 56 GHz are -15.4 dB, -18 dB, and -26.4 dB, respectively. The impedance bandwidths around these frequencies were 1.26 GHz (27.245 - 28.505), 1.08 GHz (37.775 - 38.855), and 12.015 GHz (51.725 - 63.74), respectively. The antenna gains at the resonant frequencies are 7.96 dBi, 6.82 dBi, and 7.93 dBi, respectively. Radiation efficiencies of 88%, 84%, and 90% were achieved at the resonant frequencies. However, it is observed that the radiation is maximum in the broadside direction at 28 GHz, although it peaks at −41o/41o and −30o/30o at 38 GHz and 56 GHz, respectively. Furthermore, the antenna design, simulations, and optimizations were carried out using HFSS, and the results were verified with CST. Both simulators showed a reasonable degree of consistency, confirming the effectiveness and reliability of the proposed antenna design.
This work presents a new design idea for a UWB printed micro strip patch antenna with two band-rejection features. The patch has an elliptical shape and its feeding using micro strip feeding line. To achieve the UWB, an elliptical slot was etched on a ground plane. The rejection of two-band is achieved with the addition of two different slots on the radiating patch, the first slot is inverted U shaped slot and the other is U-shaped slot, so there is no need for antenna’s additional size. The radiation pattern of the suggested antenna has an omnidirectional shape for the frequency band from 3.168 GHz to over 15 GHz. There is a two rejection bands, the first one covering 4.87−5.79 GHz with a center frequency of 5.42 GHz, and the other covering 7.2−8.45 GHz with a center frequency of 7.8 GHz. The chosen substrate for the current work is FR-4 having permittivity of 4.3 and thickness of 1.43 mm and the suggested antenna has a small size of 24.5×24.5mm2. The Experimental results of the manufactured antenna showed agreement with those results of the simulated one.
This paper discusses the design and performance of a frequency reconfigurable antenna for Internet of Things (IoT) applications. The antenna is designed to operate on multiple frequency bands and be reconfigurable to adjust to different communication standards and environmental conditions. The antenna design consists of monopole with one PIN diode and 50Ωfeed line. By changing the states of the diode, the antenna can be reconfigured to operate in a dual-band mode and a wideband mode. The performance of the antenna was evaluated through simulation. The antenna demonstrated good impedance matching, acceptable gain, and stable radiation patterns across the different frequency bands. The antenna has compact dimensions of (26×19×1.6) mm3. It covers the frequency range 2.95 GHz -8.2 GHz, while the coverage of the dual- band mode is (2.7-3.8) GHz and (4.57-7.4) GHz. The peak gain is 1.57 dBi for the wideband mode with omnidirectional radiation pattern. On the other hand, the peak gain of the dual-band mode is 0.87 dBi at 3 GHz and 0.47 dBi at 6 GHz with an omnidirectional radiation pattern too.
In this paper, a new compact coplanar antenna used for Radio frequency identification (FID) applications is presented. This antenna is operated at the resonant frequency of 2.45 GHz. The proposed antenna is designed on an epoxy substrate material type (FR-4) with small size of (40 × 28) mm2 in which the dielectric thickness (h) of 1.6 mm, relative permittivity (er) of 4.3 and tangent loss of 0.025. In this design the return loss is less than −10 dB in the frequency interval (2.12 − 2.84) GHz and the minimum value of return loss is -32 dB at resonant frequency. The maximum gain of the proposed antenna is 1.22 dB and the maximum directivity obtained is 2.27 dB. The patch and the ground plane of the proposed antenna are in the same surface. The proposed antenna has a wide bandwidth and omnidirectional radiation pattern with small size. The overall size of the compact antenna is (40 × 28 × 1.635) mm3. The Computer Simulation Technology (CST) microwave studio software is used for simulation and gets layout design.
This paper presents a new design of the filtering antenna with a quasi-elliptic function response. The basic structure of the proposed filtering antenna is consists of a four-folded arms open-loop resonator (OLR). The proposed filtering antenna is simulated, improved and, analyzed by using 3D Computer Simulation Technology (CST) electromagnetic simulator software. The design has good spurious harmonic suppression in the upper and lower stopbands. The Insertion Loss of the proposed filtering antenna IL=0.2 dB and the Return Loss RL= -25.788 dB at the center frequency fo=5.75 GHz. The passband bandwidth which is relatively wide, and equal to 0.793 GHz. The microstrip filtering antenna circuit shows good design results compared to the conventional microstrip patch antenna. The filtering antenna design circuit with etched ground plane structure also has good design results compared to the filtering antenna design which has a complete ground plane structure.
The relative intensity noise (RIN) characteristics in distributed feedback (DFB) lasers are analyzed theoretically by proposing a new methodology. In addition to temperature variation (T), the effect of other model parameters such as injection current (I inj ), active layer volume (V), spontaneous emission (β sp ) and gain compression (ε) factors on RIN characteristics is investigated. The numerical simulations shows, the peak RIN level can be reduced to around –150 dB/Hz, while relaxation oscillation frequency (ROF) is shifted towards 5.6 GHz. In addition, the RIN level is increased with temperature by the rate of 0.2 dB/ºC and ROF is reduced by the rate of 0.018 GHz/ºC. Results show, the low RIN level can be obtained by selecting model parameters reasonably.
In this paper, a semi-elliptical annular slot loaded trapezoidal dipole antenna with band-notched characteristics for UWB applications is designed. A microstrip feedline consisting of multiple feedline sections is used for improving the impedance matching. The band-notched characteristics for WLAN band are achieved by loading the trapezoidal dipole arms with semi- elliptical annular slots. The designed antenna structure has an operating range from 3.5-12.4 GHz(109%) with band-rejection in the frequency range of 5-6 GHz. Nearly omnidirectional patterns are achieved for the designed antenna structure. The designed antenna structure provided an average peak gain of 2.12 dB over the entire frequency range except in the notched band where it reduced to -2.4 dB. The experimental and simulation results are observed to be in good agreement. An improved bandwidth performance with miniaturized dimensions as compared to earlier reported antenna structures is achieved.
This paper presents a new microstrip dual-mode closed-loop resonator (DMCLR) that is used to design lower insertion loss and better transmission dual-passband filtering antenna. The dual passband center frequencies of the presented filtering antenna are located at foI=5.52 GHz and foII= 6.65 GHz. The presented dual-mode, dual-passband microstrip filtering antenna results are simulated and optimized by using Computer Simulation Technology (CST) software and defected ground structure technique. Three modes of dual-mode resonators have been utilized to design the dual- passband microstrip filtering antenna and compare their results. The presented dual-mode, dual-passband microstrip filtering antenna is established on FR-4 epoxy dielectric material which has a relative permittivity εr= 4.3 which has height thickness h = 1.6 mm and loss tangent tan δ=0.002. Defected Ground Structure (DGS) technique has been utilized to improve the performance of the presented dual-mode, dual-passband microstrip filtering antenna.
This paper proposes a new design of compact coplanar waveguide (CPW) fed -super ultra-wideband (S-UWB) MIMO antenna with a bandwidth of 3.6 to 40 GHz. The proposed antenna is composed of two orthogonal sector-shape monopoles (SSM) antenna elements to perform polarization diversity. In addition, a matched L-shaped common ground element is attached for more efficient coupling. The FR-4 substrate of the structure with a size of 23 × 45 × 1.6 mm3 and a dielectric constant of 4.3 is considered. The proposed design is simulated by using CST Microwave Studio commercial software. The simulation shows that the antenna has low mutual coupling (|S21| < -20 dB) with |S11|<−10 dB, ranging from 3.6 to 40 GHz. Envelope correlation coefficient (ECC) is less than 0.008, diversity gain (DG) is more than 9.99, mean effective gain (MEG) is below - 3 dB and total active reflection coefficient (TARC) is less than -6 dB over the whole response band is reported. The proposed MIMO antenna is expected efficiently cover the broadest range of frequencies for contemporary communications applications.
A compact and low cost butterfly shaped UWB filtenna with a pair of parasitic elements and a pair of slits is proposed in this work. The filtenna is supposed to be designed on a common and low-cost FR4 substrate with overall dimensions of 26mm*20mm*1.6mm .By inserting a pair of g /2( where g is waveguide wavelength ) D-shaped parasitic elements around the antenna feed line, the radiation of the 5 GHz WLAN applications is canceled to eliminated the interference . Furthermore, the rejection of the X-band satellite downlink is achieved by engraving a pair of g /4 J-shaped slits on the ground plane. The simulation results exhibits the perfect coverage of the proposed filtenna for the UWB frequency band as well as the elimination of the undesired radiation within the filtenna operating band.
In this paper, a single-band printed rectenna of size (45×36) mm 2 has been designed and analyzed to work at WiFi frequency of 2.4 GHz for wireless power transmission. The antenna part of this rectenna has the shape of question mark patch along with an inverted L-shape resonator and printed on FR4 substrate. The rectifier part of this rectenna is also printed on FR4 substrate and consisted of impedance matching network, AC-to-DC conversion circuit and a DC filter. The design and simulation results of this rectenna have been done with the help of CST 2018 and ADS 2017 software packages. The maximum conversion efficiency obtained by this rectenna is found as 57.141% at an input power of 2 dBm and a load of 900 Ω.
In order to provide an efficient, low cost, and small size radiating structure that passes a certain frequency band with negligible amount of interference, the combination of filters and antennas is proposed to form a single element called filtenna. This paper presents a filtenna element with compact size that can radiates in the 5G mid-band frequency range (3.6-3.8 GHz) and perfectly rejects all the frequencies outside this range. The filtenna is composed of a printed circuit antenna that is terminated with a crescent shaped stub that is coupled electromagnetically with a miniaturized sharp band-pass filter. The simulation results show a filtenna reflection coefficient with a reduced value within the intended 5G band and with high values along the other unwanted frequencies. Moreover, the structure has an omnidirectional pattern with reasonable gain value within the band of interest, and this makes the antenna very suitable for portable 5G devices.
Beam squint phenomenon is considered one of the most drawbacks that limit the use of (mm-waves) array antennas; which causes significant degradation in the BER of the system. In this paper, a uniform linear array (ULA) system is exemplified at millimeter (mm-waves) frequency bands to realize the effects of beam squint phenomena from different directions on an equivalent gain response to represent the channel performance in terms of bit error rate (BER). A simple QPSK passband signal model is developed and tested according to the proposed antenna array with beam squint. The computed results show that increasing the passband bandwidth and the number of antenna elements, have a significant degradation in BER at the receiver when the magnitude and phase errors caused by the beam squint at 26 GHz with various spectrum bandwidths.