Rehabilitation robots have become one of the main technical instruments that Treat disorder patients in the biomedical engineering field. The robotic glove for the rehabilitation is basically made of specialized materials which can be designed to help the post-stroke patients. In this paper, a review of the different types of robotic glove for Rehabilitation have been discussed and summarized. This study reviews a different mechanical system of robotic gloves in previous years. The selected studies have been classified into four types according to the Mechanical Design: The first type is a tendon-driven robotic glove. The second type of robotic glove works with a soft actuator as a pneumatic which is operated by air pressure that passes through a plastic pipe, pressure valves, and air compressor. The third type is the exoskeleton robotic gloves this type consists of a wearable mechanical design that can used a finger-based sensor to measure grip strength or is used in interactive video applications. And the fourth type is the robotic glove with a liner actuator this type consists of a tape placed on the fingers and connected to linear actuators to open and close the fingers during the rehabilitation process.
The goal for collaborative robots has always driven advancements in robotic technology, especially in the manufacturing sector. However, this is not the case in service sectors, especially in the health sector. Thus, this lack of focus has now opened more room for the design and development of service robots that can be used in the health sector to help patients with ailments, cognitive problems, and disabilities. There is currently a global effort towards the development of new products and the use of robotic medical devices and computer-assisted systems. However, the major problem has been the lack of a thorough and systematic review of robotic research into disease and epidemiology, especially from a technology perspective. Also, medical robots are increasingly being used in healthcare to perform a variety of functions that improve patient care. This scoping review is aimed at discovering the types of robots used in healthcare and where they are deployed. Moreover, the current study is an overview of various forms of robotic technology and its uses the healthcare industry. The considered technologies are the products of a partnership between the healthcare sector and academia. They demonstrate the research and testing that are necessary for the service of robot development before they can be employed in practical applications and service scenarios. The discussion also focused on the upcoming research areas in robotic systems as well as some important technologies necessary for human-robot collaboration, such as wireless sensor networks, big data, and artificial intelligence.
Path planning is an essential concern in robotic systems, and it refers to the process of determining a safe and optimal path starting from the source state to the goal one within dynamic environments. We proposed an improved path planning method in this article, which merges the Dijkstra algorithm for path planning with Potential Field (PF) collision avoidance. In real-time, the method attempts to produce multiple paths as well as determine the suitable path that’s both short and reliable (safe). The Dijkstra method is employed to produce multiple paths, whereas the Potential Field is utilized to assess the safety of each route and choose the best one. The proposed method creates links between the routes, enabling the robot to swap between them if it discovers a dynamic obstacle on its current route. Relating to path length and safety, the simulation results illustrate that Dynamic Dijkstra-Potential Field (Dynamic D-PF) achieves better performance than the Dijkstra and Potential Field each separately, and going to make it a promising solution for the application of robotic automation within dynamic environments.
A composite PD and sliding mode neural network (NN)-based adaptive controller, for robotic manipulator trajectory tracking, is presented in this paper. The designed neural networks are exploited to approximate the robotics dynamics nonlinearities, and compensate its effect and this will enhance the performance of the filtered error based PD and sliding mode controller. Lyapunov theorem has been used to prove the stability of the system and the tracking error boundedness. The augmented Lyapunov function is used to derive the NN weights learning law. To reduce the effect of breaching the NN learning law excitation condition due to external disturbances and measurement noise; a modified learning law is suggested based on e-modification algorithm. The controller effectiveness is demonstrated through computer simulation of cylindrical robot manipulator.
Parallel manipulators have a rigid structure and can pick up the heavy objects. Therefore, a parallel manipulator has been developed based on the cooperative of three arms of a robotic system to make the whole system suitable for solving many problems such as materials handling and industrial automation. The three revolute joints are used to achieve the mechanism operation of the parallel planar robot. Those revolute joints are geometrically designed using an open-loop spatial robotic platform. In this paper, the geometric structure with three revolute joints is used to drive and analyze the inverse kinematic model for the 3RRR parallel planar robot. In the proposed design, three main variables are considered: the length of links of the 3RRR parallel planar robot, base positions of the platform, and joint angles’ geometry. Cayley-Menger determinants and bilateration are proposed to calculate these three variables to determine the final position of the platform and to move specific objects according to given desired trajectories. The proposed structure of the 3RRR parallel planar robot is simulated and different desired trajectories are tested to study the performance of the proposed stricter. Furthermore, the hardware implementation of the proposed structure is accomplished to validate the design in practical terms.
The last few years Quadrotor became an important topic, many researches have implemented and tested concerning that topic. Quadrotor also called an unmanned Aerial Vehicle (UAV), it's highly used in many applications like security, civil applications, aid, rescue and a lot of other applications. It’s not a conventional helicopter because of small size, low cost and the ability of vertical and takeoff landing (VTOL). The models kept an eye on quadrotors were presented, the advancement of this new kind of air vehicle is hindered for a very long while because of different reasons, for example, mechanical multifaceted nature, enormous size and weight, and challenges in charge particularly. Just as of late a lot of interests and endeavors have been pulled in on it; a quadrotor has even become a progressively discretionary vehicle for useful application. Quadrotor can be used in variable, different , outdoor and indoor missions; these missions should be implemented with high value of accuracy and quality. In this work two scenarios suggested for different two missions. First mission the quadrotor will be used to reach different goals in the simulated city for different places during one flight using path following algorithm. The second mission will be an indoor arrival mission, during that mission quadrotor will avoid obstacles by using only Pure pursuit algorithm (PPA). To show the benefit of using the new strategy it will compare with a victor field histogram algorithm (VFH) which is used widely in robotics for avoiding obstacles, the comparison will be in terms of reaching time and distance of reaching the goal. The Gazebo Simulator (GS) is used to visualize the movement of the quadrotor. The gazebo has another preferred position it helps to show the motion development of the quadrotor without managing the mathematical model of the quadrotor. The Robotic Operating System (ROS) is used to transfer the data between the MATLAB Simulink program and the Gazebo Simulator. The diversion results show that, the proposed mission techniques win to drive the quarter on the perfect route similarly at the limit with regards to the quadrotor to go without hitting any obstacle in the perfect way.
In modern robotic field, many challenges have been appeared, especially in case of a multi-robot system that used to achieve tasks. The challenges are due to the complexity of the multi-robot system, which make the modeling of such system more difficult. The groups of animals in real world are an inspiration for modeling of a multi- individual system such as aggregation of Artemia. Therefore, in this paper, the multi-robot control system based on external stimuli such as light has been proposed, in which the feature of tracking Artemia to the light has been employed for this purpose. The mathematical model of the proposed design is derived and then Simulated by V-rep software. Several experiments are implemented in order to evaluate the proposed design, which is divided into two scenarios. The first scenario includes simulation of the system in situation of attraction of robot to fixed light spot, while the second scenario is the simulation of the system in the situation of the robots tracking of the movable light spot and formed different patterns like a straight-line, circular, and zigzag patterns. The results of experiments appeared that the mobile robot attraction to high-intensity light, in addition, the multi-robot system can be controlled by external stimuli. Finally, the performance of the proposed system has been analyzed.
Path-planning is a crucial part of robotics, helping robots move through challenging places all by themselves. In this paper, we introduce an innovative approach to robot path-planning, a crucial aspect of robotics. This technique combines the power of Genetic Algorithm (GA) and Probabilistic Roadmap (PRM) to enhance efficiency and reliability. Our method takes into account challenges caused by moving obstacles, making it skilled at navigating complex environments. Through merging GA’s exploration abilities with PRM’s global planning strengths, our GA-PRM algorithm improves computational efficiency and finds optimal paths. To validate our approach, we conducted rigorous evaluations against well-known algorithms including A*, RRT, Genetic Algorithm, and PRM in simulated environments. The results were remarkable, with our GA-PRM algorithm outperforming existing methods, achieving an average path length of 25.6235 units and an average computational time of 0.6881 seconds, demonstrating its speed and effectiveness. Additionally, the paths generated were notably smoother, with an average value of 0.3133. These findings highlight the potential of the GA-PRM algorithm in real-world applications, especially in crucial sectors like healthcare, where efficient path-planning is essential. This research contributes significantly to the field of path-planning and offers valuable insights for the future design of autonomous robotic systems.
The evolution of wireless communication technology increases human machine interaction capabilities especially in controlling robotic systems. This paper introduces an effective wireless system in controlling the directions of a wheeled robot based on online hand gestures. The hand gesture images are captured and processed to be recognized and classified using neural network (NN). The NN is trained using extracted features to distinguish five different gestures; accordingly it produces five different signals. These signals are transmitted to control the directions of the cited robot. The main contribution of this paper is, the technique used to recognize hand gestures is required only two features, these features can be extracted in very short time using quite easy methodology, and this makes the proposed technique so suitable for online interaction. In this methodology, the preprocessed image is partitioned column-wise into two half segments; from each half one feature is extracted. This feature represents the ratio of white to black pixels of the segment histogram. The NN showed very high accuracy in recognizing all of the proposed gesture classes. The NN output signals are transmitted to the robot microcontroller wirelessly using Bluetooth. Accordingly the microcontroller guides the robot to the desired direction. The overall system showed high performance in controlling the robot movement directions.