×
The submission system is temporarily under maintenance. Please send your manuscripts to
Go to Editorial ManagerIn this study, we propose a compact, tri-band microstrip patch antenna for 5G applications, operating at 28 GHz, 38 GHz, and 60 GHz frequency bands. Starting with a basic rectangular microstrip patch, modifications were made to achieve resonance in the target frequency bands and improve S11 performance, gain, and impedance bandwidth. An inset feed was employed to enhance antenna matching, and a π–shaped slot was incorporated into the radiating patch for better antenna characteristics. The design utilized a Rogers RT/Duroid-5880 substrate with a 0.508 mm thickness, a 2.2 dielectric constant, and a 0.0009 loss tangent. The final dimensions of the antenna are 8 x 8.5 x 0.508 mm3. The maximum S11 values obtained at the resonant frequencies of 27.9 GHz, 38.4 GHz, and 56 GHz are -15.4 dB, -18 dB, and -26.4 dB, respectively. The impedance bandwidths around these frequencies were 1.26 GHz (27.245 - 28.505), 1.08 GHz (37.775 - 38.855), and 12.015 GHz (51.725 - 63.74), respectively. The antenna gains at the resonant frequencies are 7.96 dBi, 6.82 dBi, and 7.93 dBi, respectively. Radiation efficiencies of 88%, 84%, and 90% were achieved at the resonant frequencies. However, it is observed that the radiation is maximum in the broadside direction at 28 GHz, although it peaks at −41o/41o and −30o/30o at 38 GHz and 56 GHz, respectively. Furthermore, the antenna design, simulations, and optimizations were carried out using HFSS, and the results were verified with CST. Both simulators showed a reasonable degree of consistency, confirming the effectiveness and reliability of the proposed antenna design.
A reconfigurable inset-fed Microstrip Patch Antenna (MPA) for dual-band behavior and stable-radiation direction has been demonstrated in this research. The suggested reconfigurable antenna has dimensions of 60×50 mm2 and is printed on an FR4 substrate that is 1.5 mm thick and has a dielectric constant (εr) and loss tangent (tanδ) equal to 4.3 and 0.02, respectively. An inset-fed line with an impedance of 50Ω is used to feed the proposed antenna structure. The parasitic capacitance is efficiently added to the proposed structure by using the slitline approach. The proposed antenna is tested and simulated, where the result shows two resonant frequencies with S11 values less than -10 dB (S11 ≤ −10). The first resonant frequency is found at 2.45 GHz with a value equal to -30.5 dB, while the second resonant is found at 3.54 GHz with a value equal to -32 dB. Moreover, the slits include two PIN diodes. After analyzing the antenna, two reconfigurable bands are obtained for various uses with stable radiation direction. The suggested antenna is constructed and measured, and the outputs of the simulation and the measurements show good agreement.
Many technical approaches were implemented in the antenna manufacturing process to maintain the desired miniaturiza- tion of the size of the antenna model which can be employed in various applied systems such as medical communication systems. Furthermore, over the past several years, nanotechnology science has rapidly grown in a wide variety of applications, which has given rise to novel ideas in the design of antennas based on nanoscale merits, leading to the use of antennae as an essential linkage between the human body and the different apparatus of the medical communication system. Some medical applications dealt with different antenna configurations, such as microstrip patch antenna or optical nanoantenna in conjugate with sensing elements, controlling units, and monitoring instruments to maintain a specified healthcare system. This study summarizes and presents a brief review of the recent applications of antennas in different medical communication systems involving highlights, and drawbacks with explores recommended issues related to using antennas in medical treatment.
This paper presents a new design of the filtering antenna with a quasi-elliptic function response. The basic structure of the proposed filtering antenna is consists of a four-folded arms open-loop resonator (OLR). The proposed filtering antenna is simulated, improved and, analyzed by using 3D Computer Simulation Technology (CST) electromagnetic simulator software. The design has good spurious harmonic suppression in the upper and lower stopbands. The Insertion Loss of the proposed filtering antenna IL=0.2 dB and the Return Loss RL= -25.788 dB at the center frequency fo=5.75 GHz. The passband bandwidth which is relatively wide, and equal to 0.793 GHz. The microstrip filtering antenna circuit shows good design results compared to the conventional microstrip patch antenna. The filtering antenna design circuit with etched ground plane structure also has good design results compared to the filtering antenna design which has a complete ground plane structure.
Electromagnetic radiation is becoming a major concern worldwide as the use of portable communication devices increases. So, it is essential to utilize safe communication devices. A compact wide-band antenna of size 12 × 8.5 × 0.33 mm3 and a metamaterial array contribution for Specific Absorption Rate (SAR) reduction are proposed in this paper. In this paper, an array structure of split ring resonators, SRR, which have a negative refractive index, is attached to the proposed MSPA to achieve SAR reduction by 89.88% in the 28 GHz range. Furthermore, the proposed antenna maintains other performance characteristics like high gain (7.7 dBi), radiation efficiency (82%), wide bandwidth (0.8 GHz), and fewer losses (-23 dB). However, this consequential antenna has been built on a low-loss Rogers RT 5880 substrate and a full ground-plane structure using CST microwave software.
This work presents a new design idea for a UWB printed micro strip patch antenna with two band-rejection features. The patch has an elliptical shape and its feeding using micro strip feeding line. To achieve the UWB, an elliptical slot was etched on a ground plane. The rejection of two-band is achieved with the addition of two different slots on the radiating patch, the first slot is inverted U shaped slot and the other is U-shaped slot, so there is no need for antenna’s additional size. The radiation pattern of the suggested antenna has an omnidirectional shape for the frequency band from 3.168 GHz to over 15 GHz. There is a two rejection bands, the first one covering 4.87−5.79 GHz with a center frequency of 5.42 GHz, and the other covering 7.2−8.45 GHz with a center frequency of 7.8 GHz. The chosen substrate for the current work is FR-4 having permittivity of 4.3 and thickness of 1.43 mm and the suggested antenna has a small size of 24.5×24.5mm2. The Experimental results of the manufactured antenna showed agreement with those results of the simulated one.