The reluctance of industry to allow wireless paths to be incorporated in process control loops has limited the potential applications and benefits of wireless systems. The challenge is to maintain the performance of a control loop, which is degraded by slow data rates and delays in a wireless path. To overcome these challenges, this paper presents an application–level design for a wireless sensor/actuator network (WSAN) based on the “automated architecture”. The resulting WSAN system is used in the developing of a wireless distributed control system (WDCS). The implementation of our wireless system involves the building of a wireless sensor network (WSN) for data acquisition and controller area network (CAN) protocol fieldbus system for plant actuation. The sensor/actuator system is controlled by an intelligent digital control algorithm that involves a controller developed with velocity PID- like Fuzzy Neural Petri Net (FNPN) system. This control system satisfies two important real-time requirements: bumpless transfer and anti-windup, which are needed when manual/auto operating aspect is adopted in the system. The intelligent controller is learned by a learning algorithm based on back-propagation. The concept of petri net is used in the development of FNN to get a correlation between the error at the input of the controller and the number of rules of the fuzzy-neural controller leading to a reduction in the number of active rules. The resultant controller is called robust fuzzy neural petri net (RFNPN) controller which is created as a software model developed with MATLAB. The developed concepts were evaluated through simulations as well validated by real-time experiments that used a plant system with a water bath to satisfy a temperature control. The effect of disturbance is also studied to prove the system's robustness.
In this paper, a new algorithm called the virtual circle tangents is introduced for mobile robot navigation in an environment with polygonal shape obstacles. The algorithm relies on representing the polygonal shape obstacles by virtual circles, and then all the possible trajectories from source to target is constructed by computing the visible tangents between the robot and the virtual circle obstacles. A new method for searching the shortest path from source to target is suggested. Two states of the simulation are suggested, the first one is the off-line state and the other is the on-line state. The introduced method is compared with two other algorithms to study its performance.
Nowadays, the trend has become to utilize Artificial Intelligence techniques to replace the human's mind in problem solving. Vehicle License Plate Recognition (VLPR) is one of these problems in which the computer outperforms the human being in terms of processing speed and accuracy of results. The emergence of deep learning techniques enhances and simplifies this task. This work emphasis on detecting the Iraqi License Plates based on SSD Deep Learning Algorithm. Then Segmenting the plate using horizontal and vertical shredding. Finally, the K-Nearest Neighbors (KNN) algorithm utilized to specify the type of car. The proposed system evaluated by using a group of 500 different Iraqi Vehicles. The successful results show that 98% regarding the plate detection, and 96% for segmenting operation.
The Leader detecting and following are one of the main challenges in designing a leader-follower multi-robot system, in addition to the challenge of achieving the formation between the robots, while tracking the leader. The biological system is one of the main sources of inspiration for understanding and designing such multi-robot systems, especially, the aggregations that follow an external stimulus such as light. In this paper, a multi-robot system in which the robots are following a spotlight is designed based on the behavior of the Artemia aggregations. Three models are designed: kinematic and two dynamic models. The kinematic model reveals the light attraction behavior of the Artemia aggregations. The dynamic model will be derived based on the newton equation of forces and its parameters are evaluated by two methods: first, a direct method based on the physical structure of the robot and, second, the Least Square Parameter Estimation method. Several experiments are implemented in order to check the success of the three proposed systems and compare their performance. The experiments are divided into three scenarios of simulation according to three paths: the straight line, circle, zigzag path. The V-Rep software has been used for the simulation and the results appeared the success of the proposed system and the high performance of tracking the spotlight and achieving the flock formation, especially the dynamic models.
The power theft is one of the main problems facing the electric energy sector in Iraq, where a large amount of electrical energy is lost due to theft. It is required to design a system capable of detecting and locating energy theft without any human interaction. This paper presents an effective solution with low cost to solve power theft issue in distribution lines. Master meter is designed to measures the power of all meters of the homes connected to it. All the measured values are transmitted to the server via GPRS. The values of power for all energy meters within the grid are also transmitted. The comparison between the power of the master meter and all the other meters are transmitted to the server. If there is a difference between the energy meters, then a theft is happened and the server will send a signal via GSM to the overrun meter to switch off the power supply. Raspberry pi is used as a server and equipped and programmed to detect the power theft.
The development of renewable resources and the deregulation of the market have made forecasting energy demand more critical in recent years. Advanced intelligent models are created to ensure accurate power projections for several time horizons to address new difficulties. Intelligent forecasting algorithms are a fundamental component of smart grids and a powerful tool for reducing uncertainty in order to make more cost- and energy-efficient decisions about generation scheduling, system reliability and power optimization, and profitable smart grid operations. However, since many crucial tasks of power operators, such as load dispatch, rely on short-term forecasts, prediction accuracy in forecasting algorithms is highly desired. This essay suggests a model for estimating Denmark’s power use that can precisely forecast the month’s demand. In order to identify factors that may have an impact on the pattern of a number of unique qualities in the city direct consumption of electricity. The current paper also demonstrates how to use an ensemble deep learning technique and Random forest to dramatically increase prediction accuracy. In addition to their ensemble, we showed how well the individual Random forest performed.
The unprogrammed penetration for the loads in the distribution networks make it work in an unbalancing situation that leads to unstable operation for those networks. the instability coming from the imbalance can cause many serious problems like the inefficient use of the feeders and the heat increased in the distribution transformers. The demands response can be regarded as a modern solution for the problem by offering a program to decreasing the consumption behavior for the program's participators in exchange for financial incentives in specific studied duration according to a direct order from the utility. The paper uses a new suggested algorithm to satisfy the direct load control demand response strategy that can be used in solving the unbalancing problem in distribution networks. The algorithm procedure has been simulated in MATLAB 2018 to real data collected from the smart meters that have been installed recently in Baghdad. The simulation results of applying the proposed algorithm on different cases of unbalancing showed that it is efficient in curing the unbalancing issue based on using the demand response strategy.
Agriculture is the primary food source for humans and livestock in the world and the primary source for the economy of many countries. The majority of the country's population and the world depend on agriculture. Still, at present, farmers are facing difficulty in dealing with the requirements of agriculture. Due to many reasons, including different and extreme weather conditions, the abundance of water quality, etc. This paper applied the Internet of Things and deep learning system to establish a smart farming system to monitor the environmental conditions that affect tomato plants using a mobile phone. Through deep learning networks, trained the dataset taken from PlantVillage and collected from google images to classify tomato diseases, and obtained a test accuracy of 97%, which led to the publication of the model to the mobile application for classification for its high accuracy. Using the IoT, a monitoring system and automatic irrigation were built that were controlled through the mobile remote to monitor the environmental conditions surrounding the plant, such as air temperature and humidity, soil moisture, water quality, and carbon dioxide gas percentage. The designed system has proven its efficiency when tested in terms of disease classification, remote irrigation, and monitoring of the environmental conditions surrounding the plant. And giving alerts when the values of the sensors exceed the minimum or higher values causing damage to the plant. The farmer can take the appropriate action at the right time to prevent any damage to the plant and thus obtain a high-quality product.
The power quality nowadays of the low voltage distribution system is vital for the utility and the consumer at the same time. One disturbing issue affected the quality conditions in the radial distribution system is load balancing. This survey paper is looking most the articles that deal with the phase nodal and lateral phase swapping because it is the efficient and direct method to maintain the current and voltage in balance situation, lead to a suitable reduction in the losses and preventing the wrong tripping of the protective relays.
Self-driving cars are a fundamental research subject in recent years; the ultimate goal is to completely exchange the human driver with automated systems. On the other hand, deep learning techniques have revealed performance and effectiveness in several areas. The strength of self-driving cars has been deeply investigated in many areas including object detection, localization as well, and activity recognition. This paper provides an approach to deep learning; which combines the benefits of both convolutional neural network CNN together with Dense technique. This approach learns based on features extracted from the feature extraction technique which is linear discriminant analysis LDA combined with feature expansion techniques namely: standard deviation, min, max, mod, variance and mean. The presented approach has proven its success in both testing and training data and achieving 100% accuracy in both terms.
In smart cities, health care, industrial production, and many other fields, the Internet of Things (IoT) have had significant success. Protected agriculture has numerous IoT applications, a highly effective style of modern agriculture development that uses artificial ways to manipulate climatic parameters such as temperature to create ideal circumstances for the growth of animals and plants. Convolutional Neural Networks (CNNs) is a deep learning approach that has made significant progress in image processing. From 2016 to the present, various applications for the automatic diagnosis of agricultural diseases, identifying plant pests, predicting the number of crops, etc., have been developed. This paper involves a presentation of the Internet of Things system in agriculture and its deep learning applications. It summarizes the most essential sensors used and methods of communication between them, in addition to the most important deep learning algorithms devoted to intelligent agriculture.
In modern robotic field, many challenges have been appeared, especially in case of a multi-robot system that used to achieve tasks. The challenges are due to the complexity of the multi-robot system, which make the modeling of such system more difficult. The groups of animals in real world are an inspiration for modeling of a multi- individual system such as aggregation of Artemia. Therefore, in this paper, the multi-robot control system based on external stimuli such as light has been proposed, in which the feature of tracking Artemia to the light has been employed for this purpose. The mathematical model of the proposed design is derived and then Simulated by V-rep software. Several experiments are implemented in order to evaluate the proposed design, which is divided into two scenarios. The first scenario includes simulation of the system in situation of attraction of robot to fixed light spot, while the second scenario is the simulation of the system in the situation of the robots tracking of the movable light spot and formed different patterns like a straight-line, circular, and zigzag patterns. The results of experiments appeared that the mobile robot attraction to high-intensity light, in addition, the multi-robot system can be controlled by external stimuli. Finally, the performance of the proposed system has been analyzed.
The PH regulation of cooling tower plant in southern fertilizers company (SCF) in Iraq is important for industry pipes protection and process continuity. According to the Mitsubishi standard, the PH of cooling water must be around (7.1 to 7.8). The deviation in PH parameter affects the pipes, such as corrosion and scale. Acidic water causes pipes to corrode, and alkaline water causes pipes to scale. The sulfuric acid solution is used for PH neutralization. The problem is that the sulfuric acid is pumped manually in the cooling tower plant every two or three hours for PH regulation. The manual operation of the sulfuric acid pump makes deviations in the PH parameter. It is very difficult to control the PH manually. To solve this problem, a PID controller for PH regulation was used. The reason for using the PID controller is that the PH response is irregular through the neutralization process. The methodology is to calculate the transfer function of the PH loop using the system identification toolbox of MATLAB, to design and implement a PID controller, to optimize the PID controller response using particle swarm optimization PSO algorithm, and to make a comparison among several tuning methods such as Ziegler Nichols (ZN) tuning method, MATLAB tuner method, and PSO algorithm tuning method. The results showed that the PSO-based PID controller tuning gives a better overshoot, less rise time, and an endurable settling time than the other tuning methods. Hence, the PH response became according to the target range. The experimental results showed that the PH regulation improved using the PSO-based PID controller tuning.