This work presents a Fuzzy based adaptive Sliding Mode Control scheme to deal with control problem of full vehicle active suspension system and take into consideration the nonlinearities of the spring and damper, unmodeled dynamics as well as the external disturbances. The control law of fuzzy based adaptive Sliding Mode Control scheme will update the parameters of fuzzy sliding mode control by using the stability analysis of Lyapunov criteria such that the convergence in finite time and the stability of the closed loop are ensured. The proposed control scheme consists of four similar subsystems used for the four sides of the vehicle. The sub control scheme contains two loops, the outer loop is built using sliding mode controller with fuzzy estimator to approximate and estimate the unknown parameters in the system. In the inner loop, a controller of type Fractional Order PID (FOPID) is utilized to create the required actuator force. All parameters in the four sub control schemes are optimized utilizing Artificial Bee Colony (ABC) algorithm in order to improve the performance. The results indicate the effectiveness and good achievement of the proposed controller in providing the best ability to limit the vibration with good robustness properties in comparison with passive suspension system and using sliding mode control method. The controlled suspension system shows excellent results when it was tested with and without typical breaking and bending torques.
Induction Motors have been used as the workhorse in the industry for a long time due to its easy build, high robustness, and generally satisfactory efficiency. However, they are significantly more difficult to control than DC motors. One of the problems which might cause unsuccessful attempts for designing a proper controller would be the time varying nature of parameters and variables which might be changed while working with the motion systems. One of the best suggested solutions to solve this problem would be the use of Sliding Mode Control (SMC). This paper presents the design of a new controller for a vector control induction motor drive that employs an outer loop speed controller using SMC. Several tests were performed to evaluate the performance of the new controller method, and two other sliding mode controller techniques. From the comparative simulation results, one can conclude that the new controller law provides high performance dynamic characteristics and is robust with regard to plant parameter variations.
In this paper, a combined RBF neural network sliding mode control and PD adaptive tracking controller is proposed for controlling the directional heading course of a ship. Due to the high nonlinearity and uncertainty of the ship dynamics as well as the effect of wave disturbances a performance evaluation and ship controller design is stay difficult task. The Neural network used for adaptively learn the uncertain dynamics bounds of the ship and their output used as part of the control law moreover the PD term is used to reduce the effect of the approximation error inherited in the RBF networks. The stability of the system with the combined control law guaranteed through Lyapunov analysis. Numeric simulation results confirm the proposed controller provide good system stability and convergence.
Induction Motor (IM) speed control is an area of research that has been in prominence for some time now. In this paper, a nonlinear controller is presented for IM drives. The nonlinear controller is designed based on input-output feedback linearization control technique, combined with sliding mode control (SMC) to obtain a robust, fast and precise control of IM speed. The input-output feedback linearization control decouples the flux control from the speed control and makes the synthesis of linear controllers possible. To validate the performances of the proposed control scheme, we provided a series of simulation results and a comparative study between the performances of the proposed control strategy and those of the feedback linearization control (FLC) schemes. Simulation results show that the proposed control strategy scheme shows better performance than the FLC strategy in the face of system parameters variation.
This article emphasizes on a strategy to design a Super Twisting Sliding Mode Control (STSMC) method. The proposed controller depends on the device of Field Programmable Gate Array (FPGA) for controlling the trajectory of robot manipulator. The gains of the suggested controller are optimized using Chaotic Particle Swarm Optimization (PSO) in MATLAB toolbox software and Simulink environment. Since the control systems speed has an influence on their stability requirements and performance, (FPGA) device is taken in consideration. The proposed control method based on FPGA is implemented using Xilinx block sets in the Simulink. Integrated Software Environment (ISE 14.7) and System Generator are employed to create the file of Bitstream which can be downloaded in the device of FPGA. The results show that the designed controller based of on the FPGA by using System Generator is completely verified the effectiveness of controlling the path tracking of the manipulator and high speed. Simulation results explain that the percentage improvement in the Means Square Error (MSEs) of using the STSMC based FPGA and tuned via Chaotic PSO when compared with the same proposed controller tuned with classical PSO are 17.32 % and 13.98 % for two different cases of trajectories respectively.
The control problem for a class of a nonlinear systems that contain the coupling of unmeasured states and unknown parameters is addressed. The system actuation is assumed to suffer from unknown dead zone nonlinearity. The parameters bounds of the unknown dead zone to be considered are unknown. Adaptive sliding mode controller, unmeasured states observer, and unknown parameters estimators are suggested such that global stability is achieved. Simulation for a single link mechanical system with unknown dead zone and friction torque is implemented for proving the efficacy of the suggested scheme.
This paper presents a low-cost Brushless DC (BLDC) motor drive system with fewer switches. BLDC motors are widely utilized in variable speed drives and industrial applications due to their high efficiency, high power factor, high torque, low maintenance, and ease of control. The proposed control strategy for robust speed control is dependent on two feedback signals which are speed sensor loop which is regulated by Sliding Mode Controller (SMC) and current sensor loop which is regulated by Proportional-Integral (PI) for boosting the drive system adaptability. In this work, the BLDC motor is driven by a four-switch three-phase inverter emulating a three-phase six switch inverter, to reduce switching losses with a low complex control strategy. In order to reach a robust performance of the proposed control strategy, the Lévy Flight Distribution (LFD) technique is used to tune the gains of PI and SMC parameters. The Integral Time Absolute Error (ITAE) is used as a fitness function. The simulation results show the SMC with LFD technique has superiority over conventional SMC and optimization PI controller in terms of fast-tracking to the desired value, reduction speed error to the zero value, and low overshoot under sudden change conditions.
In this paper, a model of PM DC Motor Drive is presented. The nonlinear dynamics of PM DC Motor Drive is discussed. The drive system shows different dynamical behaviors; periodic, quasi-period, and chaotic and are characterized by bifurcation diagrams, time series evolution, and phase portrait. The stabilization of chaos to a fixed point is adopted using slide mode controller (SMC). The chaotic dynamics are suppressed and the fixed point dynamics are observed after the activation of proposed controller. Numerical simulation results show the effectiveness of the proposed method of control for stabilization the chaos and different disturbances in the system.
The paper dells with a modified experimental prototype for pulse-width modulation (PWM) sliding mode control (SMC) applied to a DC-to-DC-boost converter operated in continuous conduction mode (CCM). Experimental results show that the proposed control schme provides good voltage regulation and is suitable for common DC-to-DC conversion purposes. The prototype and its implementation are given in detail. The static and dynamic performances of the The static and dynamic performances of the experimental system are recorded. Experimental results show that the proposed control scheme provides good voltage regulation and is suitable for common DC-to-DC conversion purposes.