In this paper, a compact two-element cylindrical dielectric resonator antenna (CDRA) array with corporate feeding is proposed for X-band applications. The dielectric resonator antenna (DRA) array is excited by a microstrip feeder using an efficient aperture-coupled method. The designed array antenna is analyzed using a CST microwave studio. The fabricated sample of the proposed CDRA antenna array showed bandwidth extending from 10.42GHz to 12.84GHz (20.8%). The achieved array gain has a maximum of 9.29dB i at frequency of 10.7GHz. This is about 2.06dB i enhancement of the gain in comparison with a single pellet CDRA. The size of the whole antenna structure is about 50 50mm 2 .
This paper presents a new design to obtain wide dual-band operation from a coplanar probe feed antenna loaded with two shorted walls. The lower band of proposed antenna has a 10 dB bandwidth of 611 MHz (24.18%) around the center frequency 2527MHz, and the upper band has a bandwidth of 1255 MHz (27.88%) around the center frequency 4501MHz. The obtained bandwidths cover WLANs operations on all bands. The bandwidth of the first operating frequency covers ISM band (2400- 2483.5) MHz, which is required by IEEE 802.11b, g and Bluetooth standards, and the bandwidth of the second operating frequency covers U-NII1 (5150-5350) MHz band, which is required by IEEE 802.11a and HiperLAN2 standards, and also covers U-NII2 (5470-5725) MHz and U-NII3/ISM (5725-5825) MHz bands, which are required by IEEE 802.11a standard. A three dimensional finite-difference time-domain (3-D FDTD) method is employed to analyze the proposed structure and find its performance. The simulated results are compared with the experimental results.
In this paper, a single-band printed rectenna of size (45×36) mm 2 has been designed and analyzed to work at WiFi frequency of 2.4 GHz for wireless power transmission. The antenna part of this rectenna has the shape of question mark patch along with an inverted L-shape resonator and printed on FR4 substrate. The rectifier part of this rectenna is also printed on FR4 substrate and consisted of impedance matching network, AC-to-DC conversion circuit and a DC filter. The design and simulation results of this rectenna have been done with the help of CST 2018 and ADS 2017 software packages. The maximum conversion efficiency obtained by this rectenna is found as 57.141% at an input power of 2 dBm and a load of 900 Ω.
This paper discusses the design and performance of a frequency reconfigurable antenna for Internet of Things (IoT) applications. The antenna is designed to operate on multiple frequency bands and be reconfigurable to adjust to different communication standards and environmental conditions. The antenna design consists of monopole with one PIN diode and 50Ωfeed line. By changing the states of the diode, the antenna can be reconfigured to operate in a dual-band mode and a wideband mode. The performance of the antenna was evaluated through simulation. The antenna demonstrated good impedance matching, acceptable gain, and stable radiation patterns across the different frequency bands. The antenna has compact dimensions of (26×19×1.6) mm3. It covers the frequency range 2.95 GHz -8.2 GHz, while the coverage of the dual- band mode is (2.7-3.8) GHz and (4.57-7.4) GHz. The peak gain is 1.57 dBi for the wideband mode with omnidirectional radiation pattern. On the other hand, the peak gain of the dual-band mode is 0.87 dBi at 3 GHz and 0.47 dBi at 6 GHz with an omnidirectional radiation pattern too.