Cover
Vol. 22 No. 1 (2026)

Published: June 15, 2026

Pages: 10-23

Original Article

Comprehensive Guide to Power Converter Topologies for SustainableWind Energy System

Muhammad Qasim Nawaz 1 Wei Jiang 1 Aimal Khan 1
1 Electrical Engineering and Automation Department, School of Electrical Energy and Power Engineering, Yangzhou University, China
History
  • Received: December 23, 2023
  • Revised: March 3, 2024
  • Accepted: March 8, 2024
  • Available Online: June 15, 2026
DOI

https://doi.org/10.37917/ijeee.22.1.2

Abstract

As demand for sustainable energy continues to grow, wind energy especially provided by permanent magnet synchronous generators (PMSG) connected to wind turbines, has become an important research area. This article provides a comprehensive review of various converter topologies used in PMSG-based wind turbines. The transition from asynchronous to synchronous generators reflects the industry’s response to the evolving landscape of energy requirements. The review explores the advantages and disadvantages associated with different power converter topologies. Among these, the ”back-to-back” converter emerges as a common and favored topology due to its superior performance over Doubly Fed Induction Generators (DFIGs). The study delves into the intricate details of these converter topologies, shedding light on their operating intricacies and the impact on overall wind energy conversion efficiency. Furthermore, the analysis demonstrates recent developments and outcomes in power conversion topologies, including resonant converters, matrix converters, and multilevel converters. Tests have shown that the continuously clamped three-phase neutral diode topology (3L NPC-BTB) is superior to the BTB 2L-VSC parallel two-phase converter with DC coupling and multi-level converters. The proposed converter topology improves energy extraction and provides a gainful solution for generator on the side converters of high-power, variable speed PMSG wind turbines. This review provides a comprehensive guide to the power converter topologies of PMSG in wind turbines and contributes to ongoing discussions on advancing wind energy technology. Additionally, this review article is also useful for researchers, engineers, and professionals interested in renewable energy systems.

Keywords

References

  1. L. Tolbert, F. Z. Peng, and T. Habetler, “Multilevel converters for large electric drives,” IEEE Transactions on Industry Applications, vol. 35, no. 1, pp. 36–44, 1999.
  2. Y. P. Siwakoti, F. Blaabjerg, P. C. Loh, and G. E. Town, “High-voltage boost quasi-z-source isolated DC/DC converter,” IET Power Electron., vol. 7, pp. 2387–2395, Sept. 2014.
  3. P. C. Loh, D. Li, Y. K. Chai, and F. Blaabjerg, “Autonomous control of interlinking converter with energy storage in hybrid AC–DC microgrid,” IEEE Trans. Ind. Appl., vol. 49, pp. 1374–1382, May 2013.
  4. H. L. Li, A. P. Hu, and G. A. Covic, “A direct AC–AC converter for inductive power-transfer systems,” IEEE Trans. Power Electron., vol. 27, pp. 661–668, Feb. 2012.
  5. F. Blaabjerg, M. Liserre, and K. Ma, “Power electronics converters for wind turbine systems,” IEEE Trans. Ind. Appl., vol. 48, pp. 708–719, Mar. 2012.
  6. K. A. Singh, A. Chaudhary, and K. Chaudhary, “Threephase AC-DC converter for direct-drive PMSG-based wind energy conversion system,” Journal of Modern Power Systems and Clean Energy, vol. 11, pp. 589–598, 2023.
  7. Z. Wang and Q. Wei, “A new current source converterbased topology for wind energy conversion systems,” in 2023 IEEE 14th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), IEEE, June 2023.
  8. K. Shanmugam, P. Electrical, and R. Chandrasekaran, “Schema of wind turbine system and analysis of appropriate converter topologies,” International Journal of Engineering and Technical Research, vol. 11, 2022.
  9. K. Alam and N. Chopra, “PID-based electronic load controller for three-phase synchronous generator,” in Lecture Notes in Electrical Engineering, Lecture notes in electrical engineering, pp. 157–167, Singapore: Springer Singapore, 2020.
  10. S. Chatterjee, D. Mukherjee, and D. Kastha, “Loss comparison of various unidirectional rectifiers for medium voltage applications,” in 2020 IEEE Calcutta Conference (CALCON), IEEE, Feb. 2020.
  11. M. Luqman, G. Yao, L. Zhou, and A. Lamichhane, “Analysis of variable speed wind energy conversion system with PMSG and vienna rectifier,” in 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), IEEE, June 2019.
  12. F. Z. Naama, A. Zegaoui, Y. Benyessad, F. Z. Kessaissia, A. Djahbar, and M. Aillerie, “Model and simulation of a wind turbine and its associated permanent magnet synchronous generator,” Energy Procedia, vol. 157, pp. 737–745, Jan. 2019.
  13. K. B. Tawfiq, A. S. Mansour, H. S. Ramadan, M. Becherif, and E. E. El-kholy, “Wind energy conversion system topologies and converters: Comparative review,” Energy Procedia, vol. 162, pp. 38–47, Apr. 2019.
  14. J. C. Dias and T. B. Lazzarin, “High-gain modular threephase hybrid boost rectifier for small wind energy harvesting system,” in 2018 13th IEEE International Conference on Industry Applications (INDUSCON), IEEE, Nov. 2018.
  15. D. Xu and Z. Luo, “A novel ac-dc converter for pmsg variable speed wind energy conversion systems,” in 2009 IEEE 6th International Power Electronics and Motion Control Conference, pp. 1117–1122, 2009.
  16. P. A. Nazer and M. V. Kirthiga, “Noval topology for reliable PMSG based wind energy conversion system,” in 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), IEEE, Dec. 2016.
  17. P. Chimurkar and P. Kothavade, “A review of different power converter topologies for PMSGs wind turbine,” in 2016 International Conference on Communication and Electronics Systems (ICCES), IEEE, Oct. 2016.
  18. G. Vijayalakshmi and M. Arutchelvi, “Design and development of controller for PMSG based wind energy conversion system,” in 2014 International Conference on Circuits, Power and Computing Technologies [ICCPCT- 2014], IEEE, Mar. 2014.
  19. Y. Zhou, D. E. Macpherson, and W. Blewitt, “High power medium frequency DC/DC power converters for wind application,” in 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), Institution of Engineering and Technology, 2014.
  20. A. Urtasun, P. Sanchis, and L. Marroyo, “Small wind turbines sensorless MPPT: Robustness analysis and lossless approach,” in 2013 IEEE Energy Conversion Congress and Exposition, IEEE, Sept. 2013.
  21. M. Jamil, R. Gupta, and M. Singh, “A review of power converter topology used with PMSG based wind power generation,” in 2012 IEEE Fifth Power India Conference, IEEE, Dec. 2012.
  22. L. Bisenieks, D. Vinnikov, and I. Galkins, New Isolated Converter for Interfacing PMSG Based Wind Turbine with Distribution Network. 2011.
  23. Y. Ma, X. Sun, and J. Chai, “Three-phase PFC rectifier with sensorless control for PMSG wind generation system,” in 2011 International Conference on Electrical Machines and Systems, IEEE, Aug. 2011.
  24. H. Shuju, L. Jianlin, and X. Honghua, “Research on a kind of diode-clamped cascade topology in direct-driven wind power system,” in 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, IEEE, Apr. 2008.
  25. J. Wang, D. Xu, B. Wu, and Z. Luo, “A low-cost rectifier topology for variable-speed high-power PMSG wind turbines,” IEEE Trans. Power Electron., vol. 26, pp. 2192–2200, Aug. 2011.
  26. Z. Chen, X. Xiao, H. Wang, and M. Liu, “Analysis of converter topological structure for direct-drive wind power system with PMSG,” in 2010 International Conference on Power System Technology, IEEE, Oct. 2010.
  27. D. Xu and Z. Luo, “A novel AC-DC converter for PMSG variable speed wind energy conversion systems,” in 2009 IEEE 6th International Power Electronics and Motion Control Conference, IEEE, May 2009.
  28. H. Shuju, L. Jianlin, and X. Honghua, “Research on a kind of diode-clamped cascade topology in direct-driven wind power system,” in 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies, IEEE, Apr. 2008.
  29. Z. Guo and L. Chang, “New converter topologies for twophase wind turbine PMSG generation system,” in APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, IEEE, Feb. 2007.
  30. Z. Xinyin, Z.Wu, M. Hu, X. Li, and G. Lv, “Coordinated control strategies of vsc-hvdc-based wind power systems for low voltage ride through,” Energies, vol. 8, pp. 7224– 7242, 07 2015.
  31. V. Bharathkumar, G. Reddy, A. Mulimani, and P. S. Patra, “Performance of current source converter fed HVDC transmission system for WECS,” vol. 9, 2020.
  32. K. Senthilnathan and K. Annapoorani, “A review on Back-to-Back converters in permanent magnet synchronous generator based wind energy conversion system,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 2, 2016.
  33. R. Melicio, V. Mendes, and J. Catal˜ao, “A pitch control malfunction analysis for wind turbines with permanent magnet synchronous generator and full-power converters: Proportional integral versus fractional-order controllers,” Electric Power Components and Systems - ELECTR POWER COMPON SYST, vol. 38, pp. 387– 406, 02 2010.
  34. R. Mel´ıcio, V. M. F. Mendes, and J. P. S. Catal˜ao, “Fractional-order control and simulation of wind energy systems with PMSG/full-power converter topology,” Energy Convers. Manag., vol. 51, pp. 1250–1258, June 2010.
  35. Z. Liu, K. Li, Y. Sun, J. Wang, Z. Wang, K. Sun, and M. Wang, “A steady-state analysis method for modular multilevel converters connected to permanent magnet synchronous generator-based wind energy conversion systems,” Energies, vol. 11, p. 461, 02 2018.
  36. C. N. Wang, X. K. Le, and W. C. Lin, “Modelling and simulation of autonomous control PMSG wind turbine,” in 2014 International Symposium on Computer, Consumer and Control, IEEE, June 2014.
  37. P. Badoni and S. Prakash, “Modeling and simulation of 2 mw pmsg wind energy conversion systems,” IOSR Journal of Electrical and Electronics Engineering, vol. 9, pp. 53–58, 01 2014.
  38. R. Mel´ıcio, V. M. F. Mendes, and J. P. S. Catal˜ao, “Computer simulation of wind power systems : Power electronics and transient stability analysis,” 2009.
  39. J. Justin, S. Reddy, D. Mercy, V. P. Arofant, and M. Mani, “PMSG fed zeta converter based micro wind energy conversion system,” International Journal of Pure and Applied Mathematics, vol. 119, pp. 15545–15551, 2018.
  40. W. Utomo, S. Sy Yi, Y. Y. Buswig, Z. Haron, A. Bakar, and M. Ahmad, “Voltage tracking of a DC-DC flyback converter using neural network control,” International Journal of Power Electronics and Drive System, vol. 2, pp. 35–42, 2012.
  41. T. Porselvi and R. Muthu, “The PMSG based wind energy conversion system with CUK converter and CHB MLI with a single DC input,” International Energy Journal, vol. 14, 2014.
  42. Z. Q. Zhu and J. Hu, “Electrical machines and powerelectronic systems for high-power wind energy generation applications: Part II - power electronics and control systems,” COMPEL: Int J for Computation and Maths. in Electrical and Electronic Eng, vol. 32, 2012.
  43. T. Freitas, P. Meneg´az, and D. Simonetti, “A new application of the multi-resonant zero-current switching buck converter: Analysis and simulation in a PMSG based WECS,” Energies, vol. 8, pp. 10219–10238, Sept. 2015.
  44. L. Bisenieks, D. Vinnikov, and I. Galkins, “New isolated converter for interfacing pmsg based wind turbine with distribution network,” 2011.
  45. R. P. Eviningsih, R. I. Putri, M. Pujiantara, A. Priyadi, and M. H. Purnomo, “Controlled bidirectional converter using PID for charging battery in the stand-alone wind turbine system with modified P&O to obtain MPPT,” in 2017 International Conference on Green Energy and Applications (ICGEA), IEEE, Mar. 2017.
  46. Z. Liu, K. Li, Y. Sun, J. Wang, Z. Wang, K. Sun, and M. Wang, “A steady-state analysis method for modular multilevel converters connected to permanent magnet synchronous generator-based wind energy conversion systems,” Energies, vol. 11, p. 461, Feb. 2018.
  47. T. Friedli, J. W. Kolar, J. Rodriguez, and P. W. Wheeler, “Comparative evaluation of three-phase AC–AC matrix converter and voltage DC-link back-to-back converter systems,” IEEE Trans. Ind. Electron., vol. 59, pp. 4487– 4510, Dec. 2012.
  48. J. L. Afonso, M. Tanta, J. G. O. Pinto, L. F. C. Monteiro, L. Machado, T. J. C. Sousa, and V. Monteiro, “A review on power electronics technologies for power quality improvement,” Energies, vol. 14, p. 8585, Dec. 2021.
  49. D. Porate, S. P. Gawande, K. B. Porate, R. N. Nagpure, M. A. Waghmare, and S. G. Kadwane, “Performance of PMSG based variable speed WECS with parallel backto- back converters using separate zero d-axis current control,” in 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), IEEE, Dec. 2018.
  50. V. Yaramasu, A. Dekka, M. J. Dur´an, S. Kouro, and B. Wu, “PMSG-based wind energy conversion systems: survey on power converters and controls,” IET Electr. Power Appl., vol. 11, pp. 956–968, July 2017.
  51. A. Mansouri, A. E. Magri, R. Lajouad, I. E. Myasse, E. K. Younes, and F. Giri, “Wind energy based conversion topologies and maximum power point tracking: A comprehensive review and analysis,” e-Prime - Advances in Electrical Engineering, Electronics and Energy, vol. 6, p. 100351, Dec. 2023.
  52. M. M. Mahmoud, M. Khalid Ratib, M. M. Aly, and A.- M. M. Abdel-Rahim, “Wind-driven permanent magnet synchronous generators connected to a power grid: Existing perspective and future aspects,” Wind Eng., vol. 46, pp. 189–199, Feb. 2022.
  53. T. R. S. de Freitas, P. J. M. Meneg´az, and D. S. L. Simonetti, “Rectifier topologies for permanent magnet synchronous generator on wind energy conversion systems: A review,” Renew. Sustain. Energy Rev., vol. 54, pp. 1334–1344, Feb. 2016.
  54. R. Teichmann and S. Bernet, “A comparison of threelevel converters versus two-level converters for lowvoltage drives, traction, and utility applications,” IEEE Trans. Ind. Appl., vol. 41, pp. 855–865, May 2005.
  55. S. M. S. H. Rafin, R. Islam, and O. A. Mohammed, “Power electronic converters for wind power generation,” in 2023 Fourth International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM), IEEE, Feb. 2023.
  56. J. Rodriguez, S. Bernet, P. K. Steimer, and I. E. Lizama, “A survey on neutral-point-clamped inverters,” IEEE Trans. Ind. Electron., vol. 57, pp. 2219–2230, July 2010.
  57. K. Ma, F. Blaabjerg, and D. Xu, “Power devices loading in multilevel converters for 10 MW wind turbines,”