Cover
Vol. 21 No. 2 (2025)

Published: December 16, 2025

Pages: 173-185

Original Article

Investigating the Impact of the Air Void Charges on the Surface Electric Field Distribution of the GIS Spacer

Ahmed Awad 1 Dawood Saleh
1Electrical Engineering Department, College of Engineering, University of Mosul, Iraq
History
  • Received: December 23, 2023
  • Revised: March 1, 2024
  • Accepted: March 6, 2024
  • Available Online: February 7, 2025
DOI

https://doi.org/10.37917/ijeee.21.2.17

Abstract

One of the important components of the gas-insulated switchgear (GIS) system are spacers. These insulators are not free from some manufacturing and operational defects that adversely affect their performance, and among these defects is the presence of air voids inside the solid insulator, which may be exposed to high electric fields that may lead to partial discharges within the voids. These partial discharges may cause the accumulation of charges on the surfaces of these insulators, increase the concentration of the electric field, and cause electric flashover across the interface surfaces between the SF6 gas and the solid insulator. With a 2D axisymmetric model based on finite element analysis (FEA) implemented in COMSOL Multiphysics software, this study investigates the impact of the charges that accumulated on the inner surfaces of the void on the electric field distribution of the spacer’s interior and exterior surfaces, as their effect is investigated when they are in different size and locations inside the insulator. This effect is more noticeable when the density of charges on the inner surface of the void increases to 1 (μC/m2) and the radius is 2 mm. When the void positioned 1 mm from both the inner and outer surfaces of the spacer, the electric field values are 14.55 and 9.4 MV/m, respectively. The impact site on the spacer surface is narrow within 3 mm and depends on the size of the void. The field enhancement factor may reach 2, and its value is higher on the outer surface than on the inner surface.

Keywords

References

  1. B. Du, H. Liang, J. Li, and Z. Ran, “Electrical field distribution along SF6/N2 filled DC– GIS/GIL epoxy spacer,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25, no. 4, pp. 1202–1210, 2018.
  2. “Simulation study of electric influence caused by defects on uhvacgis spacer, author=Wang, Haoran and Peng, Zongren and Guo, Zihao and Wang, Qingyu and Liao, Jintao and Zhang, Siyu, booktitle=2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM), pages=676–679, year=2015, organization=IEEE,”
  3. F. Gutfleisch and L. Niemeyer, “Measurement and simulation of PD in epoxy voids,” IEEE transactions on Dielectrics and Electrical insulation, vol. 2, no. 5, pp. 729–743, 1995.
  4. K. Wu, Y. Suzuoki, and L. Dissado, “The contribution of discharge area variation to partial discharge patterns in disc-voids,” Journal of Physics D: Applied Physics, vol. 37, no. 13, p. 1815, 2004.
  5. G. C. Crichton, P. Karlsson, and A. Pedersen, “Partial discharges in ellipsoidal and spheroidal voids,” IEEE Transactions on Electrical Insulation, vol. 24, no. 2, pp. 335–342, 1989.
  6. B. Ma, X. Wu, X. Li, X. Zhou, Q. Zhang, J. Li, and X. Han, “Study of the influence of void defect size on partial discharge characteristics in solid insulation,” in 2018 IEEE International Conference on High Voltage Engineering and Application (ICHVE), pp. 1–4, IEEE, 2018.
  7. M. Hikita, M. Kozako, H. Takada, M. Higashiyama, T. Hirose, S. Nakamura, and T. Umemura, “Partial discharge phenomena in artificial cavity in epoxy cast resin insulation system,” in 2010 IEEE International Symposium on Electrical Insulation, pp. 1–5, IEEE, 2010.
  8. H. Illias, G. Chen, and P. L. Lewin, “Partial discharge behavior within a spherical cavity in a solid dielectric material as a function of frequency and amplitude of the applied voltage,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 18, no. 2, pp. 432–443, 2011.
  9. H. Illias, G. Chen, and P. Lewin, “Measurement of partial discharge activities within two artificial spherical voids in an epoxy resin,” in 2011 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, pp. 489–492, IEEE, 2011.
  10. H. V. P. Nguyen and B. T. Phung, “Void discharge behaviours as a function of cavity size and voltage waveform under very low-frequency excitation,” High Voltage, vol. 3, no. 2, pp. 96–102, 2018.
  11. S. Morsalin, B. Phung, and A. Cavallini, “Measurement and modeling of partial discharge arising from different cavity geometries at very low frequency,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 27, no. 4, pp. 1110–1118, 2020.
  12. T. Umemoto, S. Yoshida, Y. Otake, H. Muto, and M. Kurimoto, “Insulation lifetime characteristics of epoxy/tio 2 nanocomposite with internal void,” in 2019 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 182–185, IEEE, 2019.
  13. D.-E. A. Mansour, K. Nishizawa, H. Kojima, N. Hayakawa, F. Endo, and H. Okubo, “Charge accumulation effects on time transition of partial discharge activity at GIS spacer defects,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 17, no. 1, pp. 247–255, 2010.
  14. W. Haoran, P. Zongren, G. Zihao,W. Qingyu, L. He, and L. Lilan, “Electrical field influence of metallic particles and inner voids on UHVACGIS spacer,” in 2016 IEEE International Conference on Dielectrics (ICD), vol. 1, pp. 359–362, IEEE, 2016.
  15. H. Zhou, G. Ma, C. Wang, J. Wang, G. Zhang, Y. Tu, and C. Li, “Review of charge accumulation on spacers of gas insulated equipment at dc stress,” CSEE Journal of Power and Energy Systems, vol. 6, no. 3, pp. 496–517, 2019.
  16. M. Ladani and P. Preetha, “Reduction of electric field stress on the surface contour and at the triple junction in UHVACGIS by spacer design optimization,” International Journal of Emerging Electric Power Systems, vol. 20, no. 2, p. 20180160, 2019.
  17. Y. Luo, J. Tang, Z. Pan, and C. Pan, “How temperature and pressure affect the electric field distribution in HVDCGIS/GIL: A numerical study,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 28, no. 4, pp. 1334–1342, 2021.
  18. C. Li, C. Lin, B. Zhang, Q. Li, W. Liu, J. Hu, and J. He, “Understanding surface charge accumulation and surface flashover on spacers in compressed gas insulation,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25, no. 4, pp. 1152–1166, 2018.
  19. Z. Liang, C. Lin, F. Liang, W. Zhuang, Y. Xu, L. Tang, Y. Zeng, J. Hu, B. Zhang, C. Li, et al., “Designing HVDCGIS/GIL spacer to suppress charge accumulation,” High Voltage, vol. 7, no. 4, pp. 645–651, 2022.
  20. H. N. Afrouzi, A. Hassan, D. T. Y. Chee, K. Mehranzamir, Z. A. Malek, S. V. Mashak, and J. Ahmed, “Indepth exploration of partial discharge modelling methods within insulations,” Cleaner Engineering and Technology, vol. 6, p. 100390, 2022.
  21. B. Du and H. Liang, Epoxy-based Spacers for Gas Insulated Power Apparatus. Springer, 2023.
  22. P. R. Manual, “Comsol multiphysics programming reference manual,” 2021.
  23. H. Li, C. Wang, Z. Guo, H. Wang, S. Zhang, Z. Peng, and F. Ma, “Influences of semi-conductive coatings on the electric field distribution of GIS spacer interface,” in 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM), pp. 887–890, IEEE, 2015.
  24. S. Chakravorti, Electric field analysis. Taylor & Francis Group, LLC, 2015.
  25. D. J. Griffiths, Introduction to electrodynamics. Cambridge University Press, 4th ed., 2017.
  26. S. Hore, S. Basak, N. Haque, S. Dalai, and M. Mukherjee, “Studies on the effect of void geometry and location on electric field distribution and partial discharge in xlpe insulated power cable by finite element analysis using comsol multiphysics simulation,” in 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA), pp. 220–225, IEEE, 2017.
  27. Q. T. Algwari and D. N. Saleh, “Numerical modeling of partial discharge in a void cavity within high-voltage cable insulation,” IEEE Transactions on Plasma Science, vol. 49, no. 5, pp. 1536–1542, 2021.
  28. B. Du, H. Liang, J. Li, and Z. Ran, “Electrical field distribution along SF6/N2 filled DC– GIS/GIL epoxy spacer,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25, no. 4, pp. 1202–1210, 2018.