Cover
Vol. 6 No. 2 (2010)

Published: November 30, 2010

Pages: 123-130

Original Article

Design and Implementation of Fuzzy Logic system for DC motor Speed Control

Dr. Maan M. Shaker 1 Yaareb M.B. Ismeal Al-khashab 2
1Electrical Engineering Technical College Mosul, Iraq
2Computer Technology Engineering State Commission for Dams & Reservoirs Mosul, Iraq
History
  • Received: September 30, 2010
  • Available Online: November 30, 2010
DOI

https://doi.org/10.37917/ijeee.6.2.7

Abstract

In this paper an integrated electronic system has been designed, constructed and tested. The system utilizes an interface card through the parallel port in addition to some auxiliary circuits to perform fuzzy control operations for DC motor speed control with load and no load. Software is written using (C++ language Ver. 3.1) to display the image as control panel for different types of both conventional and fuzzy control. The main task of the software is to simulate: first, how to find out the correct parameters for fuzzy logic controller (membership’s function, rules and scaling factor). Second, how to evaluate the gain factors (K P , K I and K D ) by Ziegler-Nichols method. When executing any type of control process the efficiency is estimated by drawing the relative speed response for this control.

References

  1. B. J. Chalmers, “Influence of saturation in brushless permanent- magnet motor drives,” IEEE Proc. B, Electr. Power Appl., vol. 139, no. 1, pp. 51-52, 1992.
  2. C. T. Johnson and R.D. Lorenz, “Experimental position controlled mechanisms,” IEEE Trans. Ind. Applicat., vol. 28, no. 6, pp. 1392-1398, 1992.
  3. C. Canudas, K. J. Astrom, and K. Braun, “Adaptive friction compensation in DC- motor drives,” IEEE J. Robot., Automat., vol. RA-3, no. 6, pp. 681-685, 1987.
  4. J. Y. Hung, W. Gao, and J. C. Hung, “Variable structure control: A survey,” IEEE Trans. Ind. Electron., vol. 40, no. [SI H. Butler, G. Honderd, and J. V. Amerongen, “Mo del reference adaptive control of a direct-drive DC motor,” IEEE Mag. Contr. Sys., vol. 9, no. 1, pp. 80-84, 1989.
  5. L. A. Zadeh, “Fuzzy sets,” Informat. Control, vol. 8, pp. 338-353,1996 .
  6. L. A. Zadeh, “Outline of a new approach to the analysis comp lex systems and decision processes,” IEEE Trans. Syst. Man Cybem., vol. SMC-3, pp. 28-44, 1973. 1. pp. 222, 1993. 338-353,1965.
  7. M. Chow and H. Tram, “Application of fuzzy logic technology for spatial load forecasting,” IEEE Trans. Power Syst., vol. 12, no. 3, pp. 1360-1366, 1997.
  8. M. Chow, J. Zhu and H. Tram, “Application of fuzzy multi-objective decision making spatial load forecasting,” IEEE Trans. Power Syst., vol. 13, no. 3, pp. 1185 - 1190, 1998 .
  9. H. Ying, W. Siler, and J. J. Buckley, “ Fuzzy control theory: A nonlinear case,” Automatica, vol. 26, no. 3, pp. 1185 - 1190, 1998. 513-520, 1990.
  10. M. Chow and A. Menozzi, “On the comparison of emerging and conventional techniques for DC motor control,” Proc. IECON, pp. 1008 -1013, 1992.
  11. J.-H. Kim, J.-H. Park, S.-W. Lee, and E. K. P. Chong, “A two -layered fuzzy logic controller for systems with dead zones,” IEEE Trans. Ind. Electron., vol. 41. no. 2, pp. 155-162,1994
  12. J.-H. Kim, K.- C. Kim, and E. K. P. Chong, “Fuzzy precompensated PID controllers,” LEEE Trans. Contr. S ys. Tech., vol. 2, no. 4, pp. 406-411, 1994.
  13. J. T. Teeter, M. Chow, and J. J. Brickley Jr., “A novel fuzzy friction compensation approach to improve the performance of a DC motor control system,” IEEE Trans.
  14. Y. Tipsuwan and M.Y. Chow “ Fuzzy logic microcontroller implementation for DC motor speed control ” IEEE Trans. pp. 1271-1276, 1999.
  15. J. Katupitiya, K. Bentley “ Interfacing with C++ Programming Real-World Applications” School of Mechanical and Manufacturing Engineering The University of New South Wales Sydney NSW 2052, Australia, pp 189-201, 2006 .